Sun Valley, California · Fabricated Structural Metal Manufacturing · NAICS 332312
12inspections
18citation items
$24,625current penalties
Oct 31, 2023last inspection
Since 1973, OSHA inspectors have visited C a Buchen Corp. in California 12 times.
The most recent inspection opened on Oct 31, 2023 after an accident, in Los Angeles and is still open.
In all, OSHA issued 18 citation items: 6 serious and 12 other-than-serious.
The proposed penalties came to $39,580; today they stand at $24,625, 38% less.
The rule cited most here is 1910.1200 (hazard communication), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. C a Buchen Corp. averages $12,935 across 1 cited inspection.
C a Buchen Corp. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,111employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Jan 8, 2013: Worker falls from stepladder and fractures pelvis
On January 8, 2013, Employee #1, employed by a structural steel fabrication and installation company, was working to install an outdoor canopy at a commercial b uilding. He had climbed up an 8-foot step ladder to hand a piece of metal tubing to a coworker. As he descended the step ladder, he missed the third rung, which caused him to lose his balance and fall approximately 3 to 4 feet onto a concre te slab. Employee #1 was transported to Santa Monica Hospital, where he was hosp italized and treated for serious fractures of his left pelvis. The president of the employing company reported this event to Cal/OSHA's district office at appro ximately 3:45 p.m. on January 8, 2013.
No citations from this inspection.
Inspection 314760299 OPENED AUG 27, 2012Closed
Planned · Complete · Safety · 20 employees at the site · Closed Jan 4, 2013
Incident on Jan 24, 2005: Rigging gear strikes employee, fracturing femur
At approximately noon on January 24, 2005, an employee was working for C.A Buche n Corporation that was engaged in metal fabrication and steel erection. The empl oyee assisted a forklift driver in moving an 11.2-ft long by 6.5-ft wide, steel column, weighing approximately 700 lbs. The column was rigged to the forklift wi th serial number 5AM91259. As it was being moved, the column got entangled with an anchor bolt in the foundation and became loose, and unstable. The rigging gea r struck the employee. He suffered a fracture to his right femur. The injured em ployee was transported to and hospitalized at Kaiser Permanente Hospital in Bald win Park.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3664 A
Other-than-serious
$225
$0
Jul 13, 2005
Closed
Citation 1, item 2
29 CFR 3650 S12
Other-than-serious
$450
$0
Jul 13, 2005
Closed
Citation 2, item 1
29 CFR 3650 K
Serious
$12,600
$6,300
Jul 13, 2005
Closed
Inspection 300826062 OPENED JUN 25, 2003Closed
Complaint · Partial · Safety · 10 employees at the site · Closed Sep 27, 2004
Incident on May 7, 2003: Employee injured by steel tube falling from hoist
On May 7, 2003, Employee #1, a helper, sustained a serious occupational injury a t his place of employment, a structural steel fabrication shop. At the time of t he accident, Employee #1 was operating the controls for a 3-ton bridge crane in the shop area. Assisting Employee #1 was another helper, Employee #2. Employee # 1 and Employee #2 were assigned by their supervisor to load structural square tu bing onto the bed of a flatbed truck, a task normally performed by each employee . Employee #2 rigged five tubes, secured with an alloy chain sling, to the 3-ton crane. Employee #1 raised the load about 10 feet into the air to move it to the bed of the flatbed truck. The investigation found that the hoist line was kinke d and used in that condition and the load was not properly secured. Two of the f ive tubes slipped out of the rigging and struck Employee #2. Employee #2 suffere d minor injuries as a result. Employee #1 responded to the accident. The remaini ng members of the load dislodged from the rigging as Employee #1 went over to as sist Employee #2. Employee #1 was struck by one of the pipes. Employee #1 sustai ned a crush injury to his right foot and was hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 4999 D01
Serious
$4,050
$1,350
Nov 6, 2003
Closed
Citation 2, item 1
29 CFR 4999 B01
Other-than-serious
$450
$300
Nov 6, 2003
Closed
4 older inspections
Inspection 112180146 OPENED JUL 21, 1992Closed
Planned · Complete · Safety · 22 employees at the site · Closed Jul 21, 1992
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Sun Valley site logged 3 recordable injuries or illnesses among about 28 workers: 10.1 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 28 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
C.A. Buchen Corp.
Sun Valley · 2025
28
3
2
10.1
3.6
Included with any plan: 1 more yearly log from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(2) Design, construction, and capacity of containers—(i) General. Only approved containers and portable tanks shall be used. Metal containers and portable tanks meeting the requirements of and containing products authorized by chapter I, title 49 of the Code of Federal Regulations (regulations issued by the Hazardous Materials Regulations Board, Department of Transportation), shall be deemed to be acceptable.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.1200(f)(4)(i)
(4) Solid materials. (i) For solid metal (such as a steel beam or a metal casting), solid wood, or plastic items that are not exempted as articles due to their downstream use, or shipments of whole grain, the required label may be transmitted to the customer at the time of the initial shipment, and need not be included with subsequent shipments to the same employer unless the information on the label changes;
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.