OSHA SearchOSHA records by employer

C & T Building Technologies, LLC: OSHA inspections and violations

Katy, Texas · Commercial and Institutional Building Construction · NAICS 236220

2inspections
4citation items
$17,268current penalties
Mar 12, 2020last inspection

OSHA has inspected C & T Building Technologies, LLC 2 times in Texas since 2016.

The latest one began on Mar 12, 2020 after a fatality or catastrophe, in Spring.

Those inspections ended with 4 citation items: 3 serious and 1 repeat.

Penalties were first proposed at $22,612 and now stand at $17,268, 24% lower after settlements or reviews.

Fall protection comes up most often in these citations: 2 items under 1926.760.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and C & T Building Technologies, LLC averages $8,634 (2 cited inspections).

1 inspection on this page followed a fatal incident.

C & T Building Technologies, LLC: OSHA citation items per year, 2016 to 2020
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

401employers cited

9 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch C & T Building Technologies, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344694344 OPENED MAR 12, 2020Closed

Fatality or catastrophe · Partial · Safety · 5 employees at the site · Closed Nov 8, 2021

9611 Hoover, Spring, TX 77379 · Structural Steel and Precast Concrete Contractors · OSHA's record · Phone and website on Google Maps

Incident on Mar 12, 2020 (fatal): Employee, shocked by electric arc, falls from roof and is ki

At 11:00 a.m. on March 12, 2020, Employee #1, employed by a construction company, was working at the renovation of a two-story commercial building. He was on the roof and using a steel tape measure in preparation for installing a piece of sheet metal roofing. The wind blew the extended part of the tape measure into an overhead power line that was transmitting 19,920 volts of electricity. An electric arc occurred, which burned and shocked Employee #1 and caused him to fall from the roof, a fall height of 25 feet. The impact of the fall resulted in blunt force traumatic injuries to his head and torso. Employee #1 was killed.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.416(a)(1) · Electrical safety in construction
Serious$5,937$4,156May 21, 2020Final
Citation 2, item 1
29 CFR 1926.760(a)(1) · Fall protection
Repeat$11,875$8,312May 21, 2020Final

Inspection 341237428 OPENED FEB 9, 2016Closed

Planned · Partial · Safety · 15 employees at the site · Closed Dec 12, 2016

4203 Greenhouse Road, Katy, TX 77449 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(c)(2)(v) · Scaffolds, general requirements
Serious$2,000$2,000Mar 3, 2016Final
Citation 1, item 2
29 CFR 1926.760(a)(1) · Fall protection
Serious$2,800$2,800Mar 3, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.416 · Electrical safety in construction

29 CFR 1926.416(a)(1)

(a) Protection of employees. (1) No employer shall permit an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric power circuit in the course of work, unless the employee is protected against electric shock by deenergizing the circuit and grounding it or by guarding it effectively by insulation or other means.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(c)(2)(v)

(v) Fork-lifts shall not be used to support scaffold platforms unless the entire platform is attached to the fork and the fork-lift is not moved horizontally while the platform is occupied.

29 CFR 1926.760 · Fall protection

29 CFR 1926.760(a)(1)

(a) General requirements. (1) Except as provided by paragraph (a)(3) of this section, each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level shall be protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems or fall restraint systems.

Other commercial and institutional building construction employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.