OSHA SearchOSHA records by employer

Cabinet Masters: OSHA inspections and violations

Spanish Fork, Utah · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

1inspections
3citation items
$750current penalties
Sep 13, 2016last inspection

OSHA inspectors have visited Cabinet Masters in Utah one time.

It opened on Sep 13, 2016 as a planned inspection, in Spanish Fork.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $1,500; today they stand at $750, 50% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Cabinet Masters averages $750 across 1 cited inspection.

Cabinet Masters: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Utah · latest 90 days of OSHA records

68employers cited

Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Utah

Checking a subcontractor, a client or your own company? Watch Cabinet Masters and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341769164 OPENED SEP 13, 2016Closed

Planned · Partial · Safety · 4 employees at the site · Closed Nov 2, 2016

1920 N 300 W, Spanish Fork, UT 84660 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$1,500$750Sep 15, 2016Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
 Serious$0$0Sep 15, 2016Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Sep 15, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other wood kitchen cabinet and countertop manufacturing employers in Utah

Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.