California Amforge Corp.: OSHA inspections and violations
Azusa, California · Metalworking Machinery Manufacturing · NAICS 333513
6inspections
7citation items
$7,465current penalties
May 7, 2026last inspection
California Amforge Corp. has 6 OSHA inspections on record in California, the first in 1992.
OSHA's last visit started on May 7, 2026 after an accident, in Azusa, and the case has not closed yet.
Across those inspections OSHA issued 7 citation items: 7 other-than-serious.
OSHA proposed $10,040 in penalties. After settlements and reviews the total is $7,465, down 26%.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. California Amforge Corp. averages $6,415 over 1 cited inspection in that time.
California Amforge Corp. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,130employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Aug 13, 2005: Employee lacerates calf while conducting a hoisting work
On August 13, 2005, Employee #1 was using a 5-ton gantry crane all morning to li ft parts and assembled them back to an 8-in.-up-setter, so the machine could be put back for production. At approximately 12:30 p.m. Employee #1 was standing be tween the large bushing and bearing of the 8- in. up-setter and the spline shaft of the 6-in. up-setter. Employee #1 was using a crane to lift the 8-in. bushing and bearing. He was holding the cables on the bushing and bearing with his left hand, and was using his other hand to operate the control box of the crane. Whe n Employee #1 pressed the lift bottom on the crane control box, the bushing bega n to rise from the floor. When the bearing began to slide, he looked right and l eft in the area, and started backing up while continuing to raise the crane. The n he stepped back again. Employee #1's left feet hit the pinion gear of the spli ne shaft and he lost his balance. The bushing came up and wedged his right feet between the bearing and the pinion gear of the spline shaft gear. It gashed his right calf with 2-in. long deep cut. Paramedics were called and transferred Empl oyee #1 to the Foothill Presbyterian Hospital for medical treatment. He was trea ted and released the same day. The investigation revealed that the Employee #1 f ailed to position himself in a safe clear area, but stood in a relativity narrow , dangerous space between the bearing and spline shaft that created an obstructi on while conducted a hoisting work.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3273 A
Other-than-serious
$2,500
$300
Nov 4, 2005
Final
Inspection 119830933 OPENED JAN 18, 1996Closed
Accident · Partial · Safety · 82 employees at the site · Closed Apr 16, 1996
Incident on Jan 18, 1996: Employee's little finger amputated in band saw
At approximately 9:00 a.m. on January 18, 1996, Employee #1 was using a band saw to cut metal bar stock in the metal cutting department. He was cleaning up meta l chips near the moving blade when his right glove became caught and struck agai nst it, partially amputating his right little finger. The air and water blower, which normally blew away the chips, was not working. Employee #1 was not using a hand brush for cleaning, and his glove was loose at the time it became caught i n the blade.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 4
29 CFR 3203 A02
Other-than-serious
$375
$0
Mar 26, 1996
Closed
Inspection 119854800 OPENED JUN 16, 1993Closed
Complaint · Partial · Health · 70 employees at the site · Closed Jun 16, 1993
Incident on May 29, 1992: Employee's finger amputated in die press
AT ABOUT 1:00 P.M. ON MAY 29, 1992, AN ACCIDENT HAPPENED AT CALIFORNIA AMFORGE C ORPORATION IN WHICH AN EMPLOYEE'S RIGHT RING FINGER WAS AMPUTATED. THE EMPLOYEE OPERATES A STEEL FORGING SHOP IN THE MANUFACTURE OF AERO-SPACE PARTS. EMPLOYEE # 1 HAS BEEN EMPLOYED WITH THE COMPANY SINCE SEPTEMBER 12, 1968, AND HAD BEEN A HE ATER FOR THE LAST 20 YEARS. AT THE TIME OF THE ACCIDENT, EMPLOYEE #1 WAS ASSISTI NG THE OPERATOR OF THE 1600-TON NATIONAL PRESS IN THE DIE-SETTING OPERATIONS. TH E DIE WAS INCORRECTLY SET. THE OPERATOR, IN VIOLATION OF THE DIE-SETTING PROCEDU RE, FAILED TO FULLY BRING DOWN THE RAM WITH THE DIE. HE TOLD EMPLOYEE #1 TO GO B EHIND THE PRESS TO HELP HIM TURN THE DIE WHILE IT WAS SUSPENDED. THE OPERATOR LO OSENED THE CLAMP, AND AS THEY TRIED TO TURN THE DIE, IT FELL ON THE RING FINGER OF EMPLOYEE #1, AMPUTATING IT. EMPLOYEE #1 WAS BROUGHT TO FOOTHILL PRESBYTERIAN HOSPITAL. THE EMPLOYER WAS CITED FOR T8CC3203(A)(2)-SERIOUS.
No citations from this inspection.
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Azusa site logged 3 recordable injuries or illnesses among about 110 workers: 2.6 per 100 full-time workers, against a median of 4.0 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
california Amforge corporation
Azusa · 2025
110
3
0
2.6
4.0
california amforge corp
Azusa · 2022
98
7
2
6.8
4.0
Included with any plan: 4 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.