OSHA SearchOSHA records by employer

California Expanded Metal: OSHA inspections and violations

Industry, California · Sheet Metal Work Manufacturing · NAICS 332322

3inspections
6citation items
$5,500current penalties
Feb 23, 2018last inspection

Since 2000, OSHA inspectors have visited California Expanded Metal in California 3 times.

The most recent inspection opened on Feb 23, 2018 after an accident, in City Of Industry.

In all, OSHA issued 6 citation items: 1 serious and 5 other-than-serious.

The proposed penalties came to $45,505; today they stand at $5,500, 88% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. California Expanded Metal averages $4,750 across 1 cited inspection.

California Expanded Metal: OSHA citation items per year, 2000 to 2018
Citation items per year, by inspection date.

California · latest 90 days of OSHA records

1,130employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in California

Checking a subcontractor, a client or your own company? Watch California Expanded Metal and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342973450 OPENED FEB 23, 2018Closed

Accident · Partial · Safety · 145 employees at the site · Closed Feb 19, 2019

263 N. Covina Ln., City Of Industry, CA 91746 · Sheet Metal Work Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 3203(A)(7)
Other-than-serious$450$365Jul 30, 2018Final
Citation 2, item 1
29 CFR 3314(C)
Serious$5,400$4,385Jul 30, 2018Final

Inspection 126107119 OPENED JUN 29, 2001Closed

Accident · Partial · Safety · 120 employees at the site · Closed Sep 13, 2010

247 N.covina Lane, Industry, CA 91744 · OSHA's record · Phone and website on Google Maps

Incident on Jun 7, 2001: Metal fragment stuck in employee's eye while hammering

At approximately 4:00 p.m. on June 8, 2001, an employee of Cast Metal Services w as doing a roll change over on a sheet metal forming machine at California Expan ded Metal located in Industry, CA. As he was removing a steel roll from the shaf t of the machine by hand, the roll hung up on the shaft. While using a metal ham mer to loosen the stuck roll, he hit the roll at the edge, causing metal chips t o fly. One metal piece hit and stuck in his right eyeball; another piece hit his right temple. The injured employee was taken to Queen of the Valley Hospital an d then transferred to San Gabriel Hospital for eye surgery. He was hospitalized for over 24 hours. An investigation determined that the employee was not wearing eye protection at the time of the accident.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 2, item 1 Other-than-serious$3,375$150Oct 12, 2001Closed
Citation 3, item 1
29 CFR 3382 A
Other-than-serious$18,000$300Oct 12, 2001Closed

Inspection 120261417 OPENED JUL 12, 2000Closed

Accident · Partial · Safety · 140 employees at the site · Closed Sep 13, 2010

247 N.covina Lane, Industry, CA 91744 · OSHA's record · Phone and website on Google Maps

Incident on Jul 11, 2000: Employee injured when fingers amputated by machine die

Employee #1 was feeding a new roll of steel through the dies of a roll forming m achine when the accident occurred. The roll forming machine was manufactured by the P and M Machine Company, Limited, but the serial number could not be located . The employer referred to this machine as the shaft wall machine on Line Number 17. The accident occurred between pass number 11 and number 12. There are a tot al of 18 passes or dies on this roll forming machine. When performing this job, the roll forming machine is in the jog mode. The roll forming machine can be jog ged from the control panel jog button or from the remote jog button, which is on the end of an extension cord that is about 20 feet long. Employee #1 said he pl aced the remote jog button on the floor and was using his right hand to feel und er the material to see where the material was crimping. While Employee #1 was fe eling under the material, the jog button was accidentally activated and his hand was pulled into the die. A coworker was standing a few feet from the control pa nel at die 18, attempting to attach a hose to the water line. A long aluminum be nch was in his way, so the coworker shoved the bench with his foot. A few second s later the coworker heard Employee #1 scream. A second coworker was standing di rectly behind Employee #1 and did not see the accident or what activated the jog button. The supervisor of Employee #1 did not witness the accident, but he noti fied the plant manager and called for emergency response. Employee #1 was transp orted to Harbor General Hospital, in Torrance, California, where he was treated for a crushing injury to his right hand that resulted in amputation of his middl e, ring, and little fingers. Employee #1 was hospitalized for over five weeks.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 3314 F
Other-than-serious$280$0Sep 13, 2000Final
Citation 4, item 1
29 CFR 3314 A
Other-than-serious$18,000$300Sep 13, 2000Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 2340.23

Other sheet metal work manufacturing employers in California

Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.