Camden, Tennessee · Men’s and Boys’ Cut and Sew Apparel Manufacturing · NAICS 315225
4inspections
9citation items
$2,232current penalties
Jan 14, 2019last inspection
OSHA has inspected Carhartt, Inc. 4 times in Tennessee since 1994.
The latest one began on Jan 14, 2019 as a planned inspection, in Camden.
Those inspections ended with 9 citation items: 1 serious and 8 other-than-serious.
Penalties were first proposed at $2,975 and now stand at $2,232, 25% lower after settlements or reviews.
Grinders and abrasive wheels comes up most often in these citations: 3 items under 1910.215.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Carhartt, Inc. averages $2,232 (1 cited inspection).
Carhartt, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Tennessee · latest 90 days of OSHA records
339employers cited
Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.
OSHA records show Carhartt, Inc. at 10 sites in 2 states. Together they've had 32 inspections and $27,688 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 10 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Camden site logged 6 recordable injuries or illnesses among about 167 workers: 2.6 per 100 full-time workers, against a median of 1.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Camden site
Camden · 2025
167
6
0
2.6
1.9
Carhartt
Camden · 2018
159
8
0
4.8
1.9
Included with any plan: 10 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
29 CFR 1910.132(f)(1)
(f) Training. (1) The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following:
(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall
Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.