OSHA has inspected Carlisle Construction Materials, LLC 2 times in Mississippi since 2019.
The latest one began on Mar 18, 2022 on a referral, in Senatobia.
Those inspections ended with 5 citation items: 3 serious and 2 other-than-serious.
Penalties were first proposed at $36,463 and now stand at $21,878, 40% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 2 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Carlisle Construction Materials, LLC averages $10,939 (2 cited inspections).
Carlisle Construction Materials, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Mississippi · latest 90 days of OSHA records
15employers cited
Get notified the morning OSHA posts each new citation in Mississippi: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Carlisle Construction Materials, LLC and get notified the morning OSHA posts a new citation for it.
OSHA records show Carlisle Construction Materials, LLC at 5 sites in 4 states. Together they've had 16 inspections and $45,864 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Apr 8, 2019: Employee amputates finger when caught between guard housing
At 4:15 a.m. on April 8, 2019, Employee #1, 33-year-old man, was working as a production coordinator for a firm that manufactured rubber roofs. He was helping a maintenance coworker work on an S1 Parkinson Winders Positran roll transfer system. The employee was aligning a winder roller along a track. He was moving the winder roller forward so that his coworker could see where to stop the winder cylinder. The maintenance coworker was positioned on the floor below. The employee was standing on an elevated platform operating the winder movement in a jog speed mode. He had his right hand positioned on a stationary enclosed guard housing, while he operated the control unit with his left hand. As the roll transfer system traveled toward him, the small finger on his right hand became caught between the roll transfer system and the guard housing. He suffered the amputation of the end of that finger. He was not hospitalized. The opening distance between the two was later estimated by a safety inspector to be less than 13 millimeters (0.5 inches). Operators of the roll transfer system worked from the platform and operated the control panel. There was no guarding to protect the area between the stationary guard housing and the roll transfer system. In an interview, an employer representative stated that he walked the plant floor throughout the day and that operators accessed the work platform at last once per shift to align or thread a new roll. Operators used the computer control panel to do this, with the machine in the jog or manual mode. The workers were in this area to align the material from time to time, but it was not a normal activity for them to do that. The safety inspector commented that the area around the roll transfer system had never been guarded. There was a small upright barrier guard on the floor but not at the level where the employee was injured as he aligned the winder roller along the track for his coworker. track for his coworker.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Senatobia site logged 0 recordable injuries or illnesses among about 118 workers: 0.0 per 100 full-time workers, against a median of 2.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Carlisle Syntec - Senatobia
Senatobia · 2020
118
0
0
0.0
2.9
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was using a wrapping machine to wrap a roll of roofing material when the employee's hand was caught between the machine's guard and wrapping arm, resulting in a right little fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Alert subscribers get notified of each newly cited employer in Mississippi the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.