Since 2019, OSHA inspectors have visited Cent-Roll Products, LLC in Ohio 2 times.
The most recent inspection opened on Aug 23, 2024 on a referral, in Fairfield.
In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
The proposed penalties came to $22,584; today they stand at $8,146, 64% less.
The rule cited most here is 1910.184 (slings), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Cent-Roll Products, LLC averages $8,146 across 1 cited inspection.
Cent-Roll Products, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Jun 4, 2019: Employee's finger is amputated on grinding wheel
At 11:45 a.m. on June 4, 2019, an employee was conducting rubber grinding at the Remco Crowning Lathe machine. Two machines are utilized; a lathe where the rubber roll rotates at 65 rpm and a grinding wheel which reduces the roll. Once the rubber roll has been completed and smooth, the employee is required to place masking tape on the roll so the grinding wheel will not pass that specific location. Employees are instructed to not place the tape on the rubber role while it is spinning; wait until it has completely stopped. The employee was placing tape on a rotating roll when her hand was pulled by the spinning rubber role onto the grinding wheel. The employee suffered an amputation of her left middle finger and was treated without hospitalization.
No citations from this inspection.
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Fairfield site logged 3 recordable injuries or illnesses among about 34 workers: 10.0 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 122 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Cent-Roll Products
Fairfield · 2024
34
3
1
10.0
2.9
Included with any plan: 2 more yearly logs from these sites, back to 2022, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was moving an 800-pound roll from one department to the next with a crane. The tube cut the strap and the roll fell onto the employee's left foot. The foot was fractured and the employee was hospitalized.
An employee was getting ready to grind a part. The lathe (rotating roll) was turned off but was still spinning when the employee's hand was pulled into a pinch point between the roll and grinding wheel, amputating a finger.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(1) Slings that are damaged or defective shall not be used.
29 CFR 1910.184(d)
(d) Inspections. Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service.
Other metalworking machinery manufacturing employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.