Since 2019, OSHA inspectors have visited Chalet Inc in Oregon 2 times.
The most recent inspection opened on Sep 30, 2019 on a referral, in Albany and is still open.
In all, OSHA issued 5 citation items: 3 serious and 2 other-than-serious.
The penalties, $200 in total, stand where OSHA first set them.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Chalet Inc averages $100 across 2 cited inspections.
Want to know if OSHA cites Chalet Inc again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company124 41st Ave Se, Albany, OR 97322 · Motor Home Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.1200(h)(3)(ii) · Hazard communication |
Serious | $100 | $100 | Nov 12, 2019 | Final |
124 41st Ave Se, Albany, OR 97322 · Motor Home Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.215(a)(4) · Grinders and abrasive wheels |
Serious | $100 | $100 | Nov 5, 2019 | Final |
| Citation 1, item 1b 29 CFR 1910.215(b)(9) · Grinders and abrasive wheels |
Serious | $0 | $0 | Nov 5, 2019 | Final |
| Citation 2, item 2 29 CFR OAR 437-001-0765(1) |
Other-than-serious | $0 | $0 | Nov 5, 2019 | Final |
| Citation 2, item 3 29 CFR 1910.303(f)(2) · Electrical equipment, general requirements |
Other-than-serious | $0 | $0 | Nov 5, 2019 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.1200(h)(3)(ii)
(ii) The physical, health, simple asphyxiation, combustible dust, and pyrophoric gas hazards, as well as hazards not otherwise classified, of the chemicals in the work area;
29 CFR 1910.215(a)(4)
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.