Since 1979, OSHA inspectors have visited Chevron U.S.A. Inc. in Mississippi 7 times.
The most recent inspection opened on Jul 16, 2025 after a fatality or catastrophe, in Pascagoula.
In all, OSHA issued 7 citation items: 2 serious and 5 other-than-serious.
The penalties, $16,790 in total, stand where OSHA first set them.
The rule cited most here is 1910.212 (machine guarding), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Chevron U.S.A. Inc. averages $16,550 across 1 cited inspection.
Citation items per year, by inspection date.
Mississippi · latest 90 days of OSHA records
16employers cited
Get notified the morning OSHA posts each new citation in Mississippi: the employer, the site address, the rules broken and the penalty.
OSHA records show Chevron U.S.A. Inc. at 13 sites in 2 states. Together they've had 100 inspections and $2,002,195 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 13 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(2) Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except:
29 CFR 1910.23 · Guarding floor and wall openings and holes
Alert subscribers get notified of each newly cited employer in Mississippi the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.