OSHA SearchOSHA records by employer

Chuck Shultz: OSHA inspections and violations

Murfreesboro, Tennessee · Framing Contractors · NAICS 238130

1inspections
8citation items
$3,300current penalties
Jan 10, 2017last inspection

OSHA inspectors have visited Chuck Shultz in Tennessee one time.

It opened on Jan 10, 2017 on a referral, in Murfreesboro.

In all, OSHA issued 8 citation items: 8 serious.

The penalties, $3,300 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,078 penalty. Chuck Shultz averages $3,300 across 1 cited inspection.

Chuck Shultz: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Chuck Shultz again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342018256 OPENED JAN 10, 2017Closed

Referral · Partial · Safety · 14 employees at the site · Closed Mar 9, 2017

Lot 1512 Willingham Run, Murfreesboro, TN 37130 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
 Serious$500$500Feb 7, 2017Final
Citation 1, item 2
29 CFR 1926.451(b)(5)(i) · Scaffolds, general requirements
 Serious$500$500Feb 7, 2017Final
Citation 1, item 3
29 CFR 1926.451(f)(3) · Scaffolds, general requirements
 Serious$500$500Feb 7, 2017Final
Citation 1, item 4
29 CFR 1926.452(a)(4) · Rules for each type of scaffold
 Serious$500$500Feb 7, 2017Final
Citation 1, item 5a
29 CFR 1926.501(b)(11) · Fall protection in construction
 Serious$600$600Feb 7, 2017Final
Citation 1, item 5b
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$0$0Feb 7, 2017Final
Citation 1, item 6a
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$700$700Feb 7, 2017Final
Citation 1, item 6b
29 CFR 1926.1053(b)(13) · Ladders in construction
 Serious$0$0Feb 7, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(13)

(13) The top or top step of a stepladder shall not be used as a step.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(2)

(2) Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide.

29 CFR 1926.452 · Rules for each type of scaffold

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in Tennessee

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.