Clack Corporation: OSHA inspections and violations
Windsor, Wisconsin · Commercial and Service Industry Machinery Manufacturing · NAICS 333319
4inspections
9citation items
$19,435current penalties
Feb 5, 2016last inspection
Since 1988, OSHA inspectors have visited Clack Corporation in Wisconsin 4 times.
The most recent inspection opened on Feb 5, 2016 on a referral, in Windsor.
In all, OSHA issued 9 citation items: 7 serious and 2 other-than-serious.
The proposed penalties came to $27,860; today they stand at $19,435, 30% less.
The rule cited most here is 1910.147 (lockout/tagout), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Clack Corporation averages $11,550 across 1 cited inspection.
Clack Corporation also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Windsor site logged 37 recordable injuries or illnesses among about 546 workers: 8.0 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 28 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Clack Corporation WI
Windsor · 2025
546
37
5
8.0
2.6
Clack WI
Windsor · 2024
473
28
6
6.5
2.6
Clack Corporation Wisconsin
Windsor · 2016
311
31
6
9.6
1.3
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee had just changed a bandsaw blade and was using the bandsaw to cut a part. His right hand contacted the "return" side of the blade, causing a deep laceration to the top right part of the hand near the knuckles of his ring and little fingers. He was hospitalized, undergoing surgery.
An employee was clearing shredded plastic out of a grinder. While the equipment was locked out, the employee pushed the blade to clear out more plastic and his finger became caught between the blade and edge of the grinder, resulting in a partial amputation of his left pinky finger.
Aug 11, 2017, Windsor: Amputation · amputations · fingertip(s)
An employee was using a band saw to cut a manufactured plastic part (42-gallon waste container) to be ground up in a granulator when the saw blade and the part wiggled. The employee's left thumb tip then made contact with the blade and was amputated.
Jan 29, 2016, Windsor: Amputation · amputations · fingertip(s)
An employee was troubleshooting a piece of machinery that was not working properly. When the employee tried to check the tension in the chain with his left index finger, the chain pulled his finger into the chain and sprocket, amputating his left index fingertip. The machine was unguarded and running at the time of the incident.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
29 CFR 1910.147(d)(3)
(3) Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s).
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.