Coextruded Plastic Technologies, Inc.: OSHA inspections and violations
Janesville, Wisconsin · Plastics Packaging Film and Sheet (including Laminated) Manufacturing · NAICS 326112
6inspections
16citation items
$35,135current penalties
Mar 24, 2026last inspection
OSHA has inspected Coextruded Plastic Technologies, Inc. 6 times in Wisconsin since 2006.
The latest one began on Mar 24, 2026 after a complaint, in Janesville.
Those inspections ended with 16 citation items: 14 serious and 2 other-than-serious.
Penalties were first proposed at $59,777 and now stand at $35,135, 41% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 4 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Coextruded Plastic Technologies, Inc. averages $8,058 (4 cited inspections).
Coextruded Plastic Technologies, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Coextruded Plastic Technologies, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Feb 17, 2022: Employee's fingertip is amputated when pulled in between bel
At 9:20 a.m. on February 17, 2022, an employee was troubleshooting a non-functioning garage door motor on an extrusion resin dock. He used an onsite scissor lift to gain access to the motor, placing him approximately 19 ft. 6 in. above ground level. As the employee was checking the tension of the belt, the motor began to operate and pulled the employee's finger in between the belt and pulley. The lack of energy control procedures for the garage door opener likely contributed to the accident. The employee's right index fingertip was amputated at the base of the nail bed. He was treated without hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Janesville site logged 6 recordable injuries or illnesses among about 110 workers: 4.9 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 54 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Coextruded Plastic Technologies, Inc.
Janesville · 2025
110
6
2
4.9
2.6
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Feb 17, 2022, Janesville: Amputation · amputations · fingertip(s)
An employee was assessing a nonfunctioning overhead garage door motor. When he touched the belt to check its tension, it activated and his hand was pulled between the belt and a pulley. The distal tip of the employee's right second digit was amputated at the base of the nailbed.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.110 · Storage and handling of liquefied petroleum gases
29 CFR 1910.110(f)(2)(i)
(2) General. (i) Containers in storage shall be located so as to minimize exposure to excessive temperature rise, physical damage, or tampering by unauthorized persons.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.