OSHA SearchOSHA records by employer

Colter Frames Inc.: OSHA inspections and violations

Murray, Utah · Showcase, Partition, Shelving, and Locker Manufacturing · NAICS 337215

1inspections
4citation items
$375current penalties
Jun 7, 2019last inspection

OSHA has inspected Colter Frames Inc. once in Utah.

The inspection began on Jun 7, 2019 as a planned inspection, in Murray.

That inspection ended with 4 citation items: 4 serious.

Penalties were first proposed at $750 and now stand at $375, 50% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Colter Frames Inc. averages $375 (1 cited inspection).

Colter Frames Inc.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Colter Frames Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344064993 OPENED JUN 7, 2019Closed

Planned · Partial · Safety · 3 employees at the site · Closed Jul 26, 2019

4698 South 200 West, Murray, UT 84107 · Showcase, Partition, Shelving, and Locker Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$750$375Jun 13, 2019Final
Citation 1, item 1b
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$0$0Jun 13, 2019Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Jun 13, 2019Final
Citation 1, item 1d
29 CFR 1910.213(i)(1) · Woodworking machinery
 Serious$0$0Jun 13, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other showcase, partition, shelving, and locker manufacturing employers in Utah

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.