Columbia Industries LLC: OSHA inspections and violations
Hillsboro, Oregon · Construction Machinery Manufacturing · NAICS 333120
3inspections
5citation items
$620current penalties
Jan 30, 2015last inspection
OSHA has inspected Columbia Industries LLC 3 times in Oregon since 2007.
The latest one began on Jan 30, 2015 after a complaint, in Hillsboro.
Those inspections ended with 5 citation items: 4 serious and 1 other-than-serious.
Penalties were first proposed at $620 and still stand at $620.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Columbia Industries LLC averages $210 (2 cited inspections).
Columbia Industries LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Hillsboro site logged 5 recordable injuries or illnesses among about 50 workers: 9.9 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 22 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Columbia Industries LLC
Hillsboro · 2023
50
5
3
9.9
3.6
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
(iii) Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.
Other construction machinery manufacturing employers in Oregon
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.