OSHA SearchOSHA records by employer

Command Tooling Systems LLC dba Ews USA: OSHA inspections and violations

Anoka, Minnesota · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · NAICS 333514

1inspections
4citation items
$1,200current penalties
Apr 2, 2025last inspection

OSHA inspectors have visited Command Tooling Systems LLC dba Ews USA in Minnesota one time.

It opened on Apr 2, 2025 as a planned inspection, in Anoka.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $2,000; today they stand at $1,200, 40% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Command Tooling Systems LLC dba Ews USA averages $1,200 across 1 cited inspection.

Command Tooling Systems LLC dba Ews USA: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

Minnesota · latest 90 days of OSHA records

371employers cited

Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Minnesota

Checking a subcontractor, a client or your own company? Watch Command Tooling Systems LLC dba Ews USA and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348156639 OPENED APR 2, 2025Closed

Planned · Complete · Safety · 30 employees at the site · Closed Jun 10, 2025

13931 Sunfish Lake Blvd, Anoka, MN 55303 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$600$360May 7, 2025Final
Citation 1, item 2
29 CFR 1910.242(b) · Hand and power tools
Serious$600$360May 7, 2025Final
Citation 1, item 3
29 CFR 1910.304(b)(4)(ii)(b) · Grounding and circuit protection
Serious$600$360May 7, 2025Final
Citation 2, item 1
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Other-than-serious$200$120May 7, 2025Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.242(b)

(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.

29 CFR 1910.304 · Grounding and circuit protection

Other special die and tool, die set, jig, and fixture manufacturing employers in Minnesota

Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.