OSHA SearchOSHA records by employer

Composite Technology Assemblies LLC: OSHA inspections and violations

Plymouth, Indiana · All Other Plastics Product Manufacturing · NAICS 326199

1inspections
5citation items
$5,000current penalties
Feb 28, 2018last inspection

OSHA inspectors have visited Composite Technology Assemblies LLC in Indiana one time.

It opened on Feb 28, 2018 on a referral, in Plymouth.

In all, OSHA issued 5 citation items: 4 serious and 1 other-than-serious.

The proposed penalties came to $10,000; today they stand at $5,000, 50% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Composite Technology Assemblies LLC averages $5,000 across 1 cited inspection.

Composite Technology Assemblies LLC also files yearly injury logs with OSHA, summarized below.

Composite Technology Assemblies LLC: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Composite Technology Assemblies LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342980984 OPENED FEB 28, 2018Closed

Referral · Partial · Safety · 45 employees at the site · Closed May 11, 2018

906 Markley Dr, Plymouth, IN 46563 · All Other Plastics Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 22.8(1)(1)(SEC2)
 Serious$4,000$2,000Mar 12, 2018Final
Citation 1, item 2a
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$4,000$2,000Mar 12, 2018Final
Citation 1, item 2b
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Mar 12, 2018Final
Citation 1, item 3
29 CFR 1910.213(i)(1) · Woodworking machinery
 Serious$2,000$1,000Mar 12, 2018Final
Citation 2, item 1
29 CFR 1910.305(g)(1)(iv)(a) · Electrical wiring methods
 Other-than-serious$0$0Mar 12, 2018Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Plymouth site logged 1 recordable injury or illness among about 212 workers: 0.6 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 102 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Oasis Lifestyle, LLC
Plymouth · 2025
212 110.62.6
Composite Technology Assemblies
Plymouth · 2019
50 000.02.6

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

29 CFR 1910.305 · Electrical wiring methods

Other all other plastics product manufacturing employers in Indiana

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.