Connector Products Inc.: OSHA inspections and violations
Pennsauken, New Jersey · Other Electronic Component Manufacturing · NAICS 334419
1inspections
2citation items
$900current penalties
Feb 24, 2016last inspection
OSHA inspectors have visited Connector Products Inc. in New Jersey one time.
It opened on Feb 24, 2016 after a complaint, in Pennsauken.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $1,200; today they stand at $900, 25% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Connector Products Inc. averages $900 across 1 cited inspection.
Connector Products Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New Jersey · latest 90 days of OSHA records
276employers cited
Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Pennsauken site logged 1 recordable injury or illness among about 35 workers: 3.1 per 100 full-time workers, against a median of 1.5 for its industry. Those cases cost 1 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Connector Products Inc
Pennsauken · 2019
35
1
1
3.1
1.5
Included with any plan: 1 more yearly log from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Other other electronic component manufacturing employers in New Jersey
Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.