OSHA SearchOSHA records by employer

Cooper Farms Processing: OSHA inspections and violations

Saint Henry, Ohio · Poultry Processing · NAICS 311615

1inspections
3citation items
$18,073current penalties
Apr 3, 2020last inspection

OSHA inspectors have visited Cooper Farms Processing in Ohio one time.

It opened on Apr 3, 2020 on a referral, in Saint Henry.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $24,097; today they stand at $18,073, 25% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,874 penalty. Cooper Farms Processing averages $18,073 across 1 cited inspection.

It reported 3 severe injuries to OSHA since 2015.

Cooper Farms Processing: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Want to know if OSHA cites Cooper Farms Processing again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344717582 OPENED APR 3, 2020Closed

Referral · Partial · Safety · 695 employees at the site · Closed Sep 2, 2020

1 Cooper Farm Drive, Saint Henry, OH 45883 · Poultry Processing · OSHA's record · Phone and website on Google Maps

Incident on Mar 25, 2020: Employee's fingers are partially amputated by tail quill pul

At 12:30 p.m. on March 25, 2020, an employee was preparing to clean the platform from blood. The employee was working in the Picker Room. The employee was tasked with cleaning blood from the platform ("drip pan"). The Tail Quill Puller ("the skinner") was located on that platform (about four feet above the floor of the platform), and the skinner was running. The employee stated that he placed the water hose on the platform between the skinner and the wall; he did it from the ground below the platform. Then, he climbed on the platform and went to retrieve the water hose. He stated: "I walked toward the skinner where I set my hose; I kneeled down in front of the skinner to grab the hose, and I put my hand on the skinner for balance. That's when the skinner pulled my right hand; it/the skinner was running, and it pulled my hand between two rollers in the center." As a result, all four fingers on the employee's right hand was partially amputated. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$13,494$10,121Jul 8, 2020Final
Citation 1, item 2a
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$10,603$7,952Jul 8, 2020Final
Citation 1, item 2b
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$0$0Jul 8, 2020Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.

Jun 7, 2023, Saint Henry: Hospitalization · fractures · ankle(s)

On June 7, 2023, an employee was walking through the facility when she slipped on a piece of turkey fat and fell, fracturing her ankle.

Apr 18, 2023, Saint Henry: Hospitalization · fractures · multiple body parts, n.e.c.

An employee was standing on an 8-foot step ladder tightening a bolt on the auto-cropping machine in the evisceration department. The wrench the employee was using came loose, causing him to lose balance and fall 3-5 feet to the concrete floor below. The employee sustained fractures to the right radius and right ilium.

Mar 25, 2020, Saint Henry: Amputation · amputations · finger(s), fingernail(s), n.e.c.

On March 25, 2020, an employee was sanitizing equipment when he lost his balance. The moving parts of a poultry machine (a tail quill puller) caught his right hand, amputating four ringers.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(f)(3)

(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.28(b)(1)(i)

(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:

Other poultry processing employers in Ohio

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.