Crayex Corporation: OSHA inspections and violations
Mcdonough, Georgia · Plastics Material and Resin Manufacturing · NAICS 325211
2inspections
3citation items
$28,745current penalties
Jun 24, 2025last inspection
OSHA has inspected Crayex Corporation 2 times in Georgia since 2023.
The latest one began on Jun 24, 2025 after a complaint, in Mcdonough.
Those inspections ended with 3 citation items: 1 serious, 1 repeat and 1 other-than-serious.
Penalties were first proposed at $47,909 and now stand at $28,745, 40% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Crayex Corporation averages $14,373 (2 cited inspections).
Crayex Corporation also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Georgia · latest 90 days of OSHA records
145employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Mcdonough site logged 8 recordable injuries or illnesses among about 33 workers: 27.0 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 115 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Crayex Corporation - GA
Mcdonough · 2022
33
8
5
27.0
2.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Dec 17, 2023, Mcdonough: Hospitalization · fractures and dislocations · elbow(s) and arms(s)
An employee was conducting a resin changeover in a winder machine when product dropped into the dancer assembly. The employee reached for it and their right arm was fractured and their elbow was dislocated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(B) An employee is required to place any part of his or her body into an area on a machine or piece of equipment where work is actually performed upon the material being processed (point of operation) or where an associated danger zone exists during a machine operating cycle.
29 CFR 1910.147(e)(3)
(3) Lockout or tagout devices removal. Each lockout or tagout device shall be removed from each energy isolating device by the employee who applied the device. Exception to paragraph (e)(3): When the authorized employee who applied the lockout or tagout device is not available to remove it, that device may be removed under the direction of the employer, provided that specific procedures and training for such removal have been developed, documented and incorporated into the employer's energy control program. The employer shall demonstrate that the specific procedure provides equivalent safety to the removal of the device by the authorized employee who applied it. The specific procedure shall include at least the following elements:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other plastics material and resin manufacturing employers in Georgia
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.