OSHA SearchOSHA records by employer

Creative Door: OSHA inspections and violations

Fort Myers, Florida · Home Centers · NAICS 444110

1inspections
3citation items
$6,480current penalties
Feb 3, 2015last inspection

OSHA inspectors have visited Creative Door in Florida one time.

It opened on Feb 3, 2015 as a planned inspection, in Fort Myers.

In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

The proposed penalties came to $10,800; today they stand at $6,480, 40% less.

Among retail employers, the typical cited inspection since 2015 ends with a $1,750 penalty. Creative Door averages $6,480 across 1 cited inspection.

Creative Door: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites Creative Door again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 340254283 OPENED FEB 3, 2015Closed

Planned · Complete · Safety · 130 employees at the site · Closed May 27, 2015

2840 South St, Fort Myers, FL 33916 · Home Centers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$6,300$3,780Feb 25, 2015Final
Citation 1, item 2
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$4,500$2,700Feb 25, 2015Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
 Other-than-serious$0$0Feb 25, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

Other home centers employers in Florida

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.