OSHA SearchOSHA records by employer

CSW, Inc.: OSHA inspections and violations

Rochester, New York · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · NAICS 333514

1inspections
3citation items
$8,000current penalties
Jun 26, 2025last inspection

OSHA has inspected CSW, Inc. once in New York.

The inspection began on Jun 26, 2025 as a planned inspection, in Rochester.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $12,801 and now stand at $8,000, 38% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and CSW, Inc. averages $8,000 (1 cited inspection).

CSW, Inc. also files yearly injury logs with OSHA, summarized below.

CSW, Inc.: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

Want to know if OSHA cites CSW, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348337866 OPENED JUN 26, 2025Closed

Planned · Partial · Safety · 30 employees at the site · Closed Mar 24, 2026

70 Pixley Industrial Parkway, Rochester, NY 14624 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(d)(1) · Lockout/tagout
 Serious$5,627$4,600Aug 12, 2025Final
Citation 1, item 2
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Serious$3,587$1,700Aug 12, 2025Final
Citation 1, item 3
29 CFR 1910.303(b)(2) · Electrical equipment, general requirements
 Serious$3,587$1,700Aug 12, 2025Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Rochester site logged 1 recordable injury or illness among about 34 workers: 3.6 per 100 full-time workers, against a median of 2.3 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
CSW Inc NY
Rochester · 2025
34 103.62.3
2
Rochester · 2025
34 103.62.3

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(d)(1)

(1) Preparation for shutdown. Before an authorized or affected employee turns off a machine or equipment, the authorized employee shall have knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.303(b)(2)

(2) Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.

Other special die and tool, die set, jig, and fixture manufacturing employers in New York

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.