OSHA SearchOSHA records by employer

D & P Custom Builders: OSHA inspections and violations

Andrews, Texas · Commercial and Institutional Building Construction · NAICS 236220

2inspections
4citation items
$4,020current penalties
Sep 11, 2015last inspection

OSHA has inspected D & P Custom Builders 2 times in Texas since 2015.

The latest one began on Sep 11, 2015 as a planned inspection, in Andrews; the case is still open.

Those inspections ended with 4 citation items: 2 serious and 2 other-than-serious.

Penalties were first proposed at $9,600 and now stand at $4,020, 58% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and D & P Custom Builders averages $4,020 (1 cited inspection).

D & P Custom Builders: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

393employers cited

8 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch D & P Custom Builders and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340910470 OPENED SEP 11, 2015Open

Planned · Partial · Safety · Open

500 N Main, Andrews, TX 79714 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

No citations from this inspection so far.

Inspection 340948108 OPENED SEP 11, 2015Closed

Planned · Partial · Safety · 3 employees at the site · Closed Oct 18, 2017

500 N. Main Street, Andrews, TX 79714 · New Single-Family Housing Construction (except For-Sale Builders) · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(10) · Fall protection in construction
Serious$2,800$2,520Oct 21, 2015Final
Citation 1, item 2
29 CFR 1926.503(a)(1) · Fall protection training in construction
Other-than-serious$2,000$500Oct 21, 2015Final
Citation 1, item 3
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$2,800$500Oct 21, 2015Final
Citation 1, item 4
29 CFR 1926.1060(a)(1) · Ladder and stairway training
Other-than-serious$2,000$500Oct 21, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1060 · Ladder and stairway training

29 CFR 1926.1060(a)(1)

(1) The employer shall ensure that each employee has been trained by a competent person in the following areas, as applicable:

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(10)

(10) Roofing work on Low-slope roofs. Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.

29 CFR 1926.503 · Fall protection training in construction

Other commercial and institutional building construction employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.