OSHA has inspected D J's Boudain, Inc. 2 times in Texas since 2010.
The latest one began on Mar 15, 2021 on a referral, in Beaumont.
Those inspections ended with 5 citation items: 5 serious.
Penalties were first proposed at $21,064 and now stand at $11,507, 45% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,874, and D J's Boudain, Inc. averages $9,557 (1 cited inspection).
D J's Boudain, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
394employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Mar 10, 2021: Employee amputates hand when caught in rotating mixing paddl
At 5:15 a.m. on March 10, 2021, Employee #1 was conducting pre-operation inspections of a mixer to clean any residual debris from the previous shift. The mixer was equipped with a guard and cover, but the interlock for the guard was bypassed. As Employee #1 was reaching in the mixer to clean residual debris, his hand was caught in the rotating mixing paddle. Energy sources for the mixer were not isolated. Employee #1 was hospitalized and underwent a surgical amputation.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Beaumont site logged 4 recordable injuries or illnesses among about 47 workers: 6.2 per 100 full-time workers, against a median of 3.7 for its industry. Those cases cost 360 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
D J's Boudain Inc.
Beaumont · 2021
47
4
2
6.2
3.7
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
An employee was cleaning an industrial mixer when the mixer activated. The employee's right hand was crushed by the mixing paddle, resulting in surgical amputation of the right hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
(c) Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.23 · Guarding floor and wall openings and holes
29 CFR 1910.303 · Electrical equipment, general requirements
Other rendering and meat byproduct processing employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.