OSHA SearchOSHA records by employer

Daniel's Construction LLC: OSHA inspections and violations

Ouray, Colorado · Framing Contractors · NAICS 238130

2inspections
9citation items
$3,925current penalties
Jul 17, 2021last inspection

OSHA has inspected Daniel's Construction LLC 2 times in Colorado since 1994.

The latest one began on Jul 17, 2021 as a planned inspection, in Aurora.

Those inspections ended with 9 citation items: 7 serious and 2 other-than-serious.

Penalties were first proposed at $12,527 and now stand at $3,925, 69% lower after settlements or reviews.

Scaffolds, general requirements comes up most often in these citations: 2 items under 1926.451.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Daniel's Construction LLC averages $3,500 (1 cited inspection).

Daniel's Construction LLC: OSHA citation items per year, 1994 to 2021
Citation items per year, by inspection date.

Colorado · latest 90 days of OSHA records

134employers cited

24 of them in the same industry

Get notified the morning OSHA posts each new citation in Colorado: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Colorado

Checking a subcontractor, a client or your own company? Watch Daniel's Construction LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345425821 OPENED JUL 17, 2021Closed

Planned · Partial · Safety · 1 employee at the site · Closed Mar 1, 2023

27720 E. Plymouth Place, Aurora, CO 80016 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$2,926$1,750Oct 29, 2021Final
Citation 1, item 2
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$2,926$1,750Oct 29, 2021Final

Inspection 109541383 OPENED APR 21, 1994Closed

Planned · Partial · Safety · 2 employees at the site · Closed Sep 26, 1996

735 Main, Ouray, CO 81427 · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(f) · Woodworking tools
Serious$1,500$75May 19, 1994Final
Citation 1, item 2
29 CFR 1926.404(b)(1)(i) · Ground-fault protection on job sites
Serious$1,500$100May 19, 1994Final
Citation 1, item 3
29 CFR 1926.451(a)(13) · Scaffolds, general requirements
Serious$525$50May 19, 1994Final
Citation 1, item 4
29 CFR 1926.451(d)(10) · Scaffolds, general requirements
Serious$1,500$100May 19, 1994Final
Citation 1, item 5
29 CFR 1926.500(g)(1) · Scope, application, and definitions applicable to this subpart
Serious$1,500$100May 19, 1994Final
Citation 2, item 2
29 CFR 1926.300(b)(2) · Tools—Hand and Power: general requirements
Other-than-serious$150$0May 19, 1994Final
Citation 2, item 3
29 CFR 1926.405(g)(2)(iv) · Job-site wiring
Other-than-serious$0$0May 19, 1994Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.300(b)(2)

(2) Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating or moving parts of equipment shall be guarded if such parts are exposed to contact by employees or otherwise create a hazard. Guarding shall meet the requirements as set forth in American National Standards Institute, B15.1-1953 (R1958), Safety Code for Mechanical Power-Transmission Apparatus.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(f)

(f) Other requirements. All woodworking tools and machinery shall meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery.

29 CFR 1926.404 · Ground-fault protection on job sites

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.500 · Scope, application, and definitions applicable to this subpart

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Colorado

Alert subscribers get notified of each newly cited employer in Colorado the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.