Dap Products, Inc.: OSHA inspections and violations
Tipp City, Ohio · Adhesive Manufacturing · NAICS 325520
1inspections
2citation items
$14,000current penalties
Jun 23, 2016last inspection
OSHA inspectors have visited Dap Products, Inc. in Ohio one time.
It opened on Jun 23, 2016 on a referral, in Tipp City.
In all, OSHA issued 2 citation items: 2 other-than-serious.
The penalties, $14,000 in total, stand where OSHA first set them.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Dap Products, Inc. averages $14,000 across 1 cited inspection.
Dap Products, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Tipp City site logged 5 recordable injuries or illnesses among about 95 workers: 4.8 per 100 full-time workers, against a median of 2.0 for its industry. Those cases cost 94 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Tipp City Plant
Tipp City · 2020
95
5
1
4.8
2.0
Tipp City site
Tipp City · 2018
80
2
0
2.6
2.0
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jun 17, 2016, Tipp City: Amputation · amputations · fingertip(s)
On June 17, 2016, an employee was troubleshooting an aerosol line can labeler to try and release a jam. The machine was shut off and did not restart. While investigating the drive belt, his middle and ring fingers were mashed between the belt drive and belt pulley. His fingertips had to be surgically amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(1) Check the machine or equipment and the immediate area around the machine or equipment to ensure that nonessential items have been removed and that the machine or equipment components are operationally intact.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.