OSHA SearchOSHA records by employer

Darwin Hernandez: OSHA inspections and violations

North Little Rock, Arkansas · Framing Contractors · NAICS 238130

1inspections
5citation items
$4,000current penalties
Mar 7, 2018last inspection

Darwin Hernandez has one OSHA inspection on record in Arkansas.

OSHA opened it on Mar 7, 2018 as a planned inspection, in North Little Rock.

From that inspection OSHA issued 5 citation items: 5 serious.

OSHA proposed $15,520 in penalties. After settlements and reviews the total is $4,000, down 74%.

Most often, OSHA cited 1926.503, fall protection training in construction (2 items).

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Darwin Hernandez averages $4,000 over 1 cited inspection in that time.

Darwin Hernandez: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Darwin Hernandez again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343002440 OPENED MAR 7, 2018Closed

Planned · Partial · Safety · 3 employees at the site · Closed Sep 12, 2022

2417 Stone Links Dr., North Little Rock, AR 72117 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(d) · Woodworking tools
 Serious$3,880$1,000Mar 23, 2018Final
Citation 1, item 2
29 CFR 1926.501(b)(13) · Fall protection in construction
 Serious$3,880$1,000Mar 23, 2018Final
Citation 1, item 3a
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$3,880$1,000Mar 23, 2018Final
Citation 1, item 3b
29 CFR 1926.503(b)(1) · Fall protection training in construction
 Serious$0$0Mar 23, 2018Final
Citation 1, item 4
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$3,880$1,000Mar 23, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(13)

(13) Residential construction. Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of § 1926.502.

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in Arkansas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.