OSHA SearchOSHA records by employer

Dash Air Inc: OSHA inspections and violations

Troutdale, Oregon · Other Support Activities for Air Transportation · NAICS 488190

1inspections
3citation items
$300current penalties
May 24, 2018last inspection

OSHA has inspected Dash Air Inc once in Oregon.

The inspection began on May 24, 2018 as a planned inspection, in Troutdale.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $300 and still stand at $300.

Woodworking machinery comes up most often in these citations: 2 items under 1910.213.

How that compares: the median penalty per cited inspection for transportation and warehousing employers since 2015 is $2,405, and Dash Air Inc averages $300 (1 cited inspection).

Dash Air Inc: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Oregon · latest 90 days of OSHA records

383employers cited

Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oregon

Checking a subcontractor, a client or your own company? Watch Dash Air Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343201869 OPENED MAY 24, 2018Closed

Planned · Complete · Safety · 3 employees at the site · Closed Nov 15, 2018

1023 Nw Graham Rd, Troutdale, OR 97060 · Other Support Activities for Air Transportation · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(i)(1) · Woodworking machinery
Serious$100$100Jul 6, 2018Final
Citation 1, item 2
29 CFR 1910.213(p)(4) · Woodworking machinery
Serious$100$100Jul 6, 2018Final
Citation 1, item 3
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$100$100Jul 6, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

29 CFR 1910.213(p)(4)

(4) Belt sanding machines shall be provided with guards at each nip point where the sanding belt runs on to a pulley. These guards shall effectively prevent the hands or fingers of the operator from coming in contact with the nip points. The unused run of the sanding belt shall be guarded against accidental contact.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Other other support activities for air transportation employers in Oregon

Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.