OSHA SearchOSHA records by employer

David Arreaga: OSHA inspections and violations

Sevierville, Tennessee · Framing Contractors · NAICS 238130

1inspections
11citation items
$24,600current penalties
Jun 13, 2023last inspection

OSHA inspectors have visited David Arreaga in Tennessee one time.

It opened on Jun 13, 2023 after a fatality or catastrophe, in Sevierville.

In all, OSHA issued 11 citation items: 11 serious.

The penalties, $24,600 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 5 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. David Arreaga averages $24,600 across 1 cited inspection.

1 inspection on this page followed a fatal incident.

David Arreaga: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

347employers cited

20 of them in the same industry

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch David Arreaga and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346775653 OPENED JUN 13, 2023Closed

Fatality or catastrophe · Complete · Safety · 9 employees at the site · Closed Dec 26, 2024

1837 Pinestand Ridge Way, Sevierville, TN 37862 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Incident on Jun 12, 2023 (fatal): Employee is killed in fall from roof

At 6:45 p.m. on June 12, 2023, an employee was installing underlayment material in preparation for asphalt shingles. The employee was unrolling/stretching the material and apparently stepped off the roof, falling 19 feet 1 inch to the deck below. The employee died due to a head injury.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.50(c) · Medical services and first aid
Serious$900$900Sep 1, 2023Final
Citation 1, item 2a
29 CFR 1926.451(a)(6) · Scaffolds, general requirements
Serious$4,000$4,000Sep 1, 2023Final
Citation 1, item 2b
29 CFR 1926.451(b)(1)(i) · Scaffolds, general requirements
Serious$0$0Sep 1, 2023Final
Citation 1, item 2c
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
Serious$0$0Sep 1, 2023Final
Citation 1, item 2d
29 CFR 1926.451(f)(7) · Scaffolds, general requirements
Serious$0$0Sep 1, 2023Final
Citation 1, item 3
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
Serious$4,000$4,000Sep 1, 2023Final
Citation 1, item 4
29 CFR 1926.454(a) · Scaffold training
Serious$1,200$1,200Sep 1, 2023Final
Citation 1, item 5
29 CFR 1926.501(b)(11) · Fall protection in construction
Serious$7,000$7,000Sep 1, 2023Final
Citation 1, item 6
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$5,400$5,400Sep 1, 2023Final
Citation 1, item 7
29 CFR 1926.503(a)(1) · Fall protection training in construction
Serious$1,200$1,200Sep 1, 2023Final
Citation 1, item 8
29 CFR 1926.1051(a) · Stairways and Ladders: general requirements
Serious$900$900Sep 1, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1051 · Stairways and Ladders: general requirements

29 CFR 1926.1051(a)

(a) A stairway or ladder shall be provided at all personnel points of access where there is a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist is provided.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(a)(6)

(6) Scaffolds shall be designed by a qualified person and shall be constructed and loaded in accordance with that design. Non-mandatory appendix A to this subpart contains examples of criteria that will enable an employer to comply with paragraph (a) of this section.

29 CFR 1926.451(b)(1)(i)

(i) Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) shall be installed so that the space between adjacent units and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary (for example, to fit around uprights when side brackets are used to extend the width of the platform).

29 CFR 1926.454 · Scaffold training

29 CFR 1926.50 · Medical services and first aid

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.