Inspection 342434107 OPENED JUN 21, 2017Closed
Accident · Partial · Safety · 10 employees at the site · Closed Dec 26, 2017
10 North Tantau Ave., Cupertino, CA 95014 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps
Incident on Jun 16, 2017: Employee handling a video monitor incurs crushing injury
At 1:15 p.m. on Friday, June 16, 2017, Employee #1, a foreman, and Coworker #1, employed by an electrical contractor, were working at a multiemployer job site, the construction of a new commercial building. They were engaged in interior electrical work, installing video monitors. As they moved a boxed video monitor on a wooden dolly from one hallway area to another, the box shifted forward. It struck Employee #1, who was in the front position, on the left side of his chest and pinned him against the hallway wall. Employee #1 felt a sharp pain in his chest, but the pain subsided when Employee #1 and Coworker #1 repositioned the box on the dolly. They continued to work. Over the weekend, Employee #1 experienced growing discomfort in his chest. By the following Tuesday, June 20, 2017, Employee #1 reported to his employer that he was experiencing chest pain and difficulty breathing. He was transported to the hospital, admitted, and treated for a pneumothorax (collapsed lung). Employee #1 required 12 days' hospitalization. During the subsequent investigation, measurements showed the dolly measured 33 inches long, 19.5 inches wide, and 7.25 inches high. This small dolly had been used to carry a boxed monitor that weighed approximately 300 pounds. The box that held the monitor measured 55 inches tall, 93 inches wide, and 18 inches deep. The investigation concluded that, while the dolly could support the weight of the load, it could not support the monitor's lateral dimension. Employee #1 and Coworker #1 were required to not only control the motion and direction of the monitor, but also support its lateral movement during the moving process.