Delta Stone Products Inc.: OSHA inspections and violations
Heber City, Utah · Cut Stone and Stone Product Manufacturing · NAICS 327991
3inspections
11citation items
$2,500current penalties
Sep 8, 2021last inspection
Since 2015, OSHA inspectors have visited Delta Stone Products Inc. in Utah 3 times.
The most recent inspection opened on Sep 8, 2021 on a referral, in Heber City.
In all, OSHA issued 11 citation items: 11 serious.
The proposed penalties came to $5,000; today they stand at $2,500, 50% less.
The rule cited most here is 1910.1053 (silica dust in general industry), 7 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Delta Stone Products Inc. averages $1,250 across 2 cited inspections.
Delta Stone Products Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Utah · latest 90 days of OSHA records
73employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Heber City site logged 1 recordable injury or illness among about 55 workers: 1.8 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Delta Stone Products
Heber City · 2023
55
1
0
1.8
2.6
Included with any plan: 1 more yearly log from these sites, back to 2022, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Permissible exposure limit (PEL). The employer shall ensure that no employee is exposed to an airborne concentration of respirable crystalline silica in excess of 50 µg/m 3, calculated as an 8-hour TWA.
29 CFR 1910.1053(e)(1)
(e) Regulated areas—(1) Establishment. The employer shall establish a regulated area wherever an employee's exposure to airborne concentrations of respirable crystalline silica is, or can reasonably be expected to be, in excess of the PEL.
29 CFR 1910.1053(f)(1)
(f) Methods of compliance—(1) Engineering and work practice controls. The employer shall use engineering and work practice controls to reduce and maintain employee exposure to respirable crystalline silica to or below the PEL, unless the employer can demonstrate that such controls are not feasible. Wherever such feasible engineering and work practice controls are not sufficient to reduce employee exposure to or below the PEL, the employer shall nonetheless use them to reduce employee exposure to the lowest feasible level and shall supplement them with the use of respiratory protection that complies with the requirements of paragraph (g) of this section.
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.