OSHA SearchOSHA records by employer

Digital Tool & Die Incorporated: OSHA inspections and violations

Grandville, Michigan · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · NAICS 333514

4inspections
8citation items
$2,500current penalties
Feb 13, 2023last inspection

Since 2020, OSHA inspectors have visited Digital Tool & Die Incorporated in Michigan 4 times.

The most recent inspection opened on Feb 13, 2023 on a referral, in Grandville.

In all, OSHA issued 8 citation items: 2 serious and 6 other-than-serious.

The proposed penalties came to $5,000; today they stand at $2,500, 50% less.

The rule cited most here is 1910.23 (ladders in general industry), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Digital Tool & Die Incorporated averages $833 across 3 cited inspections.

Digital Tool & Die Incorporated also files yearly injury logs with OSHA, summarized below.

Digital Tool & Die Incorporated: OSHA citation items per year, 2020 to 2023
Citation items per year, by inspection date.

Michigan · latest 90 days of OSHA records

653employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Michigan: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Michigan

Checking a subcontractor, a client or your own company? Watch Digital Tool & Die Incorporated and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346499981 OPENED FEB 13, 2023Closed

Referral · Partial · Safety · 64 employees at the site · Closed Mar 16, 2023

2606 Sanford Ave Sw, Grandville, MI 49418 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 408.22139(1)
Other-than-serious$0$0Feb 17, 2023Final

Inspection 345241442 OPENED APR 8, 2021Closed

Planned · Partial · Safety · 72 employees at the site · Closed May 13, 2021

2606 Sanford Ave Sw, Grandville, MI 49418 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.23(b)(8) · Ladders in general industry
Other-than-serious$0$0Apr 19, 2021Final
Citation 1, item 2
29 CFR 1910.23(b)(9) · Ladders in general industry
Other-than-serious$0$0Apr 19, 2021Final

Inspection 344860150 OPENED JUL 30, 2020Closed

Planned · Partial · Safety · 71 employees at the site · Closed Oct 9, 2020

2606 Sanford Ave Sw, Grandville, MI 49418 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on May 18, 2020: Employee's left hand is crushed in square-up machine

At 10:15 a.m. on May 18, 2020, a nineteen-year-old employee was working for a firm that manufactured special dies and tools, die sets, jigs, and fixtures. He was a machine operator. He was operating an Amada machine. He was squaring a block of steel on the machine. He was not using the required hand tool to hold the steel block in place. He inadvertently pushed a wrong button, the one that activated the clamping device. The squaring block clamped the employee's left hand. The employee's left hand and finger were crushed. The employee was treated without hospitalization.

No citations from this inspection.

Inspection 344563812 OPENED JAN 29, 2020Closed

Referral · Partial · Safety · 72 employees at the site · Closed Apr 13, 2020

2606 Sanford Ave Sw, Grandville, MI 49418 · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Sep 25, 2019: Employee's finger is amputated in square up machine

At 7:45 a.m. on September 25, 2019, an employee was setting up a steel block in the Amada THV430 square up machine when he lowered the ram of the clamping device onto his finger while holding the steel block in place. Employee suffered an amputation to his left index fingertip and was treated without hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 408.12611(A)
Serious$3,500$1,750Mar 23, 2020Final
Citation 1, item 1b
29 CFR 408.12646
Serious$0$0Mar 23, 2020Final
Citation 2, item 1
29 CFR 408.1014J
Other-than-serious$1,000$500Mar 23, 2020Final
Citation 2, item 2a
29 CFR 408.22112B(1)
Other-than-serious$500$250Mar 23, 2020Final
Citation 2, item 2b
29 CFR 408.22129(1)
Other-than-serious$0$0Mar 23, 2020Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Grandville site logged 1 recordable injury or illness among about 47 workers: 3.6 per 100 full-time workers, against a median of 2.3 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
75_84
Grandville · 2025
47 103.62.3
Digital Tool & Die, Inc.
Grandville · 2018
72 202.32.3

Included with any plan: 6 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.23 · Ladders in general industry

29 CFR 1910.23(b)(8)

(8) Ladders are used only for the purposes for which they were designed;

29 CFR 1910.23(b)(9)

(9) Ladders are inspected before initial use in each work shift, and more frequently as necessary, to identify any visible defects that could cause employee injury;

Other special die and tool, die set, jig, and fixture manufacturing employers in Michigan

Alert subscribers get notified of each newly cited employer in Michigan the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.