OSHA SearchOSHA records by employer

Dirt Cheap, LLC: OSHA inspections and violations

Blue Mountain, Mississippi · Packing and Crating · NAICS 488991

2inspections
4citation items
$12,275current penalties
Oct 9, 2019last inspection

Dirt Cheap, LLC has 2 OSHA inspections on record in Mississippi, the first in 2019.

OSHA's last visit started on Oct 9, 2019 on a referral, in Petal.

Across those inspections OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

OSHA proposed $20,459 in penalties. After settlements and reviews the total is $12,275, down 40%.

Most often, OSHA cited 1910.213, woodworking machinery (3 items).

For context, across all transportation and warehousing employers the median penalty per cited inspection since 2015 is $2,405. Dirt Cheap, LLC averages $12,275 over 1 cited inspection in that time.

It reported 2 severe injuries to OSHA since 2015.

Dirt Cheap, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Mississippi · latest 90 days of OSHA records

15employers cited

Get notified the morning OSHA posts each new citation in Mississippi: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Mississippi

Checking a subcontractor, a client or your own company? Watch Dirt Cheap, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Dirt Cheap, LLC at 5 sites in 2 states. Together they've had 6 inspections and $13,285 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 344367834 OPENED OCT 9, 2019Closed

Referral · Partial · Safety · 560 employees at the site · Closed Dec 27, 2019

334 North Maine St., Petal, MS 39465 · General Merchandise Stores · OSHA's record · Phone and website on Google Maps

Incident on Oct 4, 2019: Employee amputates fingertip while feeding wood into table s

At 2:15 p.m. on October 4, 2019, an employee was working in a department store using a Powermatic 2000 table saw with a missing hood. The employee had been pulling wood from the other end of the saw when he switched sides and began to feed wood into the saw. At the same time, a coworker was pulling the wood from the other end. As the employee went to feed the wood into the saw, it kicked and he caught his finger on the blade. The employee amputated his left middle fingertip and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$11,934$7,160Dec 13, 2019Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Dec 13, 2019Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Dec 13, 2019Final
Citation 2, item 1
29 CFR 1904.39(a)(2) · Reporting deaths and severe injuries
Other-than-serious$8,525$5,115Dec 13, 2019Final

Inspection 344182639 OPENED JUL 25, 2019Closed

Referral · Partial · Safety · 595 employees at the site · Closed Jul 26, 2019

30 Industrial Park Drive, Blue Mountain, MS 38610 · Packing and Crating · OSHA's record · Phone and website on Google Maps

Incident on Jul 18, 2019: Employee fractures skull after falling in parking lot

At approximately 4:00 p.m. on July 18, 2019, an employee was working and staging inventory. The employee left the staging area inside the facility and walked to the outside shipping dock preparing the first trailer for shipment. The employee was observed by another employee lying on the concrete in the dock area. The employee sustained a fractured skull during a fall on concrete and was hospitalized for these injuries.

No citations from this inspection.

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Oct 4, 2019, Petal: Amputation · amputations · fingertip(s)

An employee was operating a table saw to cut plywood when the saw blade cut and amputated his left middle fingertip.

Jul 18, 2019, Blue Mountain: Hospitalization · heat exhaustion, prostration · body systems

After operating a forklift, an employee walked to an outside shipping area, lost consciousness, and fell, striking his head on the concrete. He was hospitalized for heat exhaustion and the head injury.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(2)

(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

Other packing and crating employers in Mississippi

Alert subscribers get notified of each newly cited employer in Mississippi the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.