OSHA SearchOSHA records by employer

DMG Corp: OSHA inspections and violations

Aiea, Hawaii · Engineering Services · NAICS 541330

1inspections
6citation items
$13,273current penalties
Aug 25, 2020last inspection

OSHA inspectors have visited DMG Corp in Hawaii one time.

It opened on Aug 25, 2020 on a referral, in Aiea.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $22,122; today they stand at $13,273, 40% less.

The rule cited most here is 1910.29 (fall protection systems in general industry), 3 times.

Among professional services employers, the typical cited inspection since 2015 ends with a $1,821 penalty. DMG Corp averages $13,273 across 1 cited inspection.

DMG Corp: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Want to know if OSHA cites DMG Corp again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344903125 OPENED AUG 25, 2020Closed

Referral · Partial · Safety · 7 employees at the site · Closed Nov 16, 2020

99-1183 Iwaena St. #a, Aiea, HI 96701 · Engineering Services · OSHA's record · Phone and website on Google Maps

Incident on Aug 21, 2020: Employee fractures pelvis when leans on unsecured railing an

At 8:00 a.m. on August 21, 2020, an employee was on the mezzanine floor, throwing boxes over the railing to the ground below. The employee leaned on the unsecured railing and fell nine feet to the concrete floor. The employee fractured his pelvis and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 12-60-2(B)(3)
 Serious$7,374$4,424Oct 15, 2020Final
Citation 1, item 1b
29 CFR 12-60-2(B)(4)(C)(II)
 Serious$0$0Oct 15, 2020Final
Citation 1, item 2
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
 Serious$7,374$4,424Oct 15, 2020Final
Citation 1, item 3a
29 CFR 1910.29(b)(1) · Fall protection systems in general industry
 Serious$7,374$4,424Oct 15, 2020Final
Citation 1, item 3b
29 CFR 1910.29(b)(2) · Fall protection systems in general industry
 Serious$0$0Oct 15, 2020Final
Citation 1, item 3c
29 CFR 1910.29(b)(3) · Fall protection systems in general industry
 Serious$0$0Oct 15, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.28(b)(1)(i)

(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:

29 CFR 1910.29 · Fall protection systems in general industry

29 CFR 1910.29(b)(1)

(1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface. The top edge height may exceed 45 inches (114 cm), provided the guardrail system meets all other criteria of paragraph (b) of this section (see Figure D-11 of this section).

29 CFR 1910.29(b)(2)

(2) Midrails, screens, mesh, intermediate vertical members, solid panels, or equivalent intermediate members are installed between the walking-working surface and the top edge of the guardrail system as follows when there is not a wall or parapet that is at least 21 inches (53 cm) high:

Other engineering services employers in Hawaii

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.