OSHA SearchOSHA records by employer

DR Framing LLC: OSHA inspections and violations

Meridian, Idaho · Framing Contractors · NAICS 238130

1inspections
4citation items
$5,500current penalties
Aug 1, 2023last inspection

DR Framing LLC has one OSHA inspection on record in Idaho.

OSHA opened it on Aug 1, 2023 as part of a related case, in Meridian.

From that inspection OSHA issued 4 citation items: 4 serious.

OSHA proposed $8,037 in penalties. After settlements and reviews the total is $5,500, down 32%.

Most often, OSHA cited 1926.1053, ladders in construction (2 items).

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. DR Framing LLC averages $5,500 over 1 cited inspection in that time.

DR Framing LLC: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites DR Framing LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346877715 OPENED AUG 1, 2023Closed

Programmed related · Partial · Safety · 6 employees at the site · Closed Mar 8, 2024

6261 S Aspiration Ave, Meridian, ID 83642 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(i)(1) · Woodworking tools
 Serious$2,679$1,500Aug 31, 2023Final
Citation 1, item 2
29 CFR 1926.501(b)(13) · Fall protection in construction
 Serious$3,349$2,500Aug 31, 2023Final
Citation 1, item 3a
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$2,009$1,500Aug 31, 2023Final
Citation 1, item 3b
29 CFR 1926.1053(b)(13) · Ladders in construction
 Serious$0$0Aug 31, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(13)

(13) The top or top step of a stepladder shall not be used as a step.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Idaho

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.