OSHA has inspected Dupli Envelope & Graphics once in Connecticut.
The inspection began on Oct 20, 2017 as a planned inspection, in Newington.
That inspection ended with 8 citation items: 8 serious.
Penalties were first proposed at $24,608 and now stand at $12,304, 50% lower after settlements or reviews.
Grinders and abrasive wheels comes up most often in these citations: 3 items under 1910.215.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Dupli Envelope & Graphics averages $12,304 (1 cited inspection).
Dupli Envelope & Graphics also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Connecticut · latest 90 days of OSHA records
86employers cited
Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Newington site logged 1 recordable injury or illness among about 14 workers: 3.2 per 100 full-time workers, against a median of 2.0 for its industry. Those cases cost 86 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Dupli Envelope & Graphics (Newington)
Newington · 2025
14
1
1
3.2
2.0
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(2) Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except:
29 CFR 1910.215(a)(4)
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.