OSHA SearchOSHA records by employer

Dynamic Stamping, Inc.: OSHA inspections and violations

Sussex, Wisconsin · Metal Crown, Closure, and Other Metal Stamping (except Automotive) · NAICS 332119

1inspections
2citation items
$8,800current penalties
May 29, 2018last inspection

OSHA inspectors have visited Dynamic Stamping, Inc. in Wisconsin one time.

It opened on May 29, 2018 on a referral, in Sussex.

In all, OSHA issued 2 citation items: 2 serious.

The proposed penalties came to $18,108; today they stand at $8,800, 51% less.

The rule cited most here is 1910.217 (mechanical power presses), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Dynamic Stamping, Inc. averages $8,800 across 1 cited inspection.

Dynamic Stamping, Inc.: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

232employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch Dynamic Stamping, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343190948 OPENED MAY 29, 2018Closed

Referral · Partial · Safety · 44 employees at the site · Closed Mar 24, 2020

W225 N6328 Village Drive, Sussex, WI 53089 · Metal Crown, Closure, and Other Metal Stamping (except Automotive) · OSHA's record · Phone and website on Google Maps

Incident on May 29, 2018: Employee is injured when struck by metal object ejected from

At 10:48 a.m. on May 29, 2018, Employee #1 was forming metal parts, using the Bliss 150 ton press, with a stack of 30 or more parts stacked between the operator and the machine die. The stacked parts got too close to the press. The press made contact, and sent an 18 gauge piece of steel, that was approximately six inches by eight 8 inches, as a projectile out of the press. The piece struck the employee in the abdomen, causing contusions and lacerations. He was hospitalized for his injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.217(d)(1)(i) · Mechanical power presses
 Serious$9,054$4,400Nov 9, 2018Final
Citation 1, item 2
29 CFR 1910.217(f)(2) · Mechanical power presses
 Serious$9,054$4,400Nov 9, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.217 · Mechanical power presses

29 CFR 1910.217(d)(1)(i)

(d) Design, construction, setting and feeding of dies—(1) General requirements. The employer shall: (i) Use dies and operating methods designed to control or eliminate hazards to operating personnel, and (ii) furnish and enforce the use of hand tools for freeing and removing stuck work or scrap pieces from the die, so that no employee need reach into the point of operation for such purposes.

29 CFR 1910.217(f)(2)

(2) Instruction to operators. The employer shall train and instruct the operator in the safe method of work before starting work on any operation covered by this section. The employer shall insure by adequate supervision that correct operating procedures are being followed.

Other metal crown, closure, and other metal stamping (except automotive) employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.