OSHA SearchOSHA records by employer

E & W Electrical Solutions LLC: OSHA inspections and violations

Buchanan, Tennessee · Electrical Contractors and Other Wiring Installation Contractors · NAICS 238210

2inspections
4citation items
$8,150current penalties
Apr 30, 2018last inspection

Since 2013, OSHA inspectors have visited E & W Electrical Solutions LLC in Tennessee 2 times.

The most recent inspection opened on Apr 30, 2018 as a planned inspection, in Martin.

In all, OSHA issued 4 citation items: 4 serious.

The penalties, $8,150 in total, stand where OSHA first set them.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. E & W Electrical Solutions LLC averages $150 across 1 cited inspection.

1 inspection on this page followed a fatal incident.

E & W Electrical Solutions LLC: OSHA citation items per year, 2013 to 2018
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

339employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch E & W Electrical Solutions LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343124582 OPENED APR 30, 2018Closed

Planned · Complete · Safety · 3 employees at the site · Closed Jun 11, 2018

732 North Lindell Street, Martin, TN 38237 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.405(b)(1) · Job-site wiring
Serious$150$150May 15, 2018Final

Inspection 317243053 OPENED JUL 9, 2013Closed

Accident · Complete · Safety · 34 employees at the site · Closed Oct 16, 2013

6745 Highway 79 North, Buchanan, TN 38222 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Incident on Jul 8, 2013 (fatal): Employee is electrocuted

On July 8, 2013, Employee #1, with E & W Electrical Solutions LLC, was stripping 277 volt AC wire in order to make a tie in at a junction box. The circuit this wire was attached to was not de-energized at the breaker panel. Employee #1 was electrocuted.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.21(b)(2) · Construction safety training
Serious$4,000$4,000Aug 22, 2013Closed
Citation 1, item 1b
29 CFR 1926.417(b) · Lockout and tagging of circuits
Serious$0$0Aug 22, 2013Closed
Citation 1, item 2
29 CFR 1926.416(a)(3) · Electrical safety in construction
Serious$4,000$4,000Aug 22, 2013Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.21 · Construction safety training

29 CFR 1926.21(b)(2)

(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.405(b)(1)

(b) Cabinets, boxes, and fittings—(1) Conductors entering boxes, cabinets, or fittings. Conductors entering boxes, cabinets, or fittings shall be protected from abrasion, and openings through which conductors enter shall be effectively closed. Unused openings in cabinets, boxes, and fittings shall also be effectively closed.

29 CFR 1926.416 · Electrical safety in construction

29 CFR 1926.416(a)(3)

(3) Before work is begun the employer shall ascertain by inquiry or direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, is so located that the performance of the work may bring any person, tool, or machine into physical or electrical contact with the electric power circuit. The employer shall post and maintain proper warning signs where such a circuit exists. The employer shall advise employees of the location of such lines, the hazards involved, and the protective measures to be taken.

29 CFR 1926.417 · Lockout and tagging of circuits

Other electrical contractors and other wiring installation contractors employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.