OSHA SearchOSHA records by employer

East Fork Pottery, LLC: OSHA inspections and violations

Biltmore Forest, North Carolina · Pottery, Ceramics, and Plumbing Fixture Manufacturing · NAICS 327110

1inspections
3citation items
$9,312current penalties
May 7, 2024last inspection

OSHA has inspected East Fork Pottery, LLC once in North Carolina.

The inspection began on May 7, 2024 as a planned inspection, in Biltmore Forest.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $9,312 and still stand at $9,312.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and East Fork Pottery, LLC averages $9,312 (1 cited inspection).

East Fork Pottery, LLC: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

228employers cited

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch East Fork Pottery, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347467649 OPENED MAY 7, 2024Closed

Planned · Complete · Health · 55 employees at the site · Closed Sep 20, 2024

531 Short Mcdowell St., Biltmore Forest, NC 28803 · Pottery, Ceramics, and Plumbing Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$7,812$7,812Jun 12, 2024Final
Citation 1, item 2
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$750$750Jun 12, 2024Final
Citation 1, item 3
29 CFR 1910.242(b) · Hand and power tools
Serious$750$750Jun 12, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.242(b)

(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.

Other pottery, ceramics, and plumbing fixture manufacturing employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.