OSHA SearchOSHA records by employer

Edge Construction: OSHA inspections and violations

Pelham, New York · Siding Contractors · NAICS 238170

1inspections
3citation items
$10,230current penalties
Aug 8, 2019last inspection

Edge Construction has one OSHA inspection on record in New York.

OSHA opened it on Aug 8, 2019 as a planned inspection, in Pelham.

From that inspection OSHA issued 3 citation items: 3 serious.

OSHA proposed $10,230 in penalties and the amount has not been reduced.

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,078. Edge Construction averages $10,230 over 1 cited inspection in that time.

Edge Construction: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Edge Construction again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344262761 OPENED AUG 8, 2019Closed

Planned · Partial · Safety · 2 employees at the site · Closed Aug 8, 2019

606 Esplanade, Pelham, NY 10803 · Siding Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.100(a) · Hard hats in construction
 Serious$3,410$3,410Sep 3, 2019Final
Citation 1, item 2
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
 Serious$3,978$3,978Sep 3, 2019Final
Citation 1, item 3
29 CFR 1926.452(j)(2) · Rules for each type of scaffold
 Serious$2,842$2,842Sep 3, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.100 · Hard hats in construction

29 CFR 1926.100(a)

(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(g)(1)

(g) Fall protection. (1) Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1) (i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.

29 CFR 1926.452 · Rules for each type of scaffold

29 CFR 1926.452(j)(2)

(2) Poles shall be secured to the structure by rigid triangular bracing or equivalent at the bottom, top, and other points as necessary. When the pump jack has to pass bracing already installed, an additional brace shall be installed approximately 4 feet (1.2 m) above the brace to be passed, and shall be left in place until the pump jack has been moved and the original brace reinstalled.

Other siding contractors employers in New York

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.