OSHA SearchOSHA records by employer

El Expreso Group LLC: OSHA inspections and violations

Houston, Texas · Charter Bus Industry · NAICS 485510

1inspections
6citation items
$9,815current penalties
Mar 3, 2017last inspection

OSHA inspectors have visited El Expreso Group LLC in Texas one time.

It opened on Mar 3, 2017 after a complaint, in Houston.

In all, OSHA issued 6 citation items: 4 serious and 2 other-than-serious.

The proposed penalties came to $16,359; today they stand at $9,815, 40% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 3 times.

Among transportation and warehousing employers, the typical cited inspection since 2015 ends with a $2,415 penalty. El Expreso Group LLC averages $9,815 across 1 cited inspection.

El Expreso Group LLC also files yearly injury logs with OSHA, summarized below.

El Expreso Group LLC: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch El Expreso Group LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342146537 OPENED MAR 3, 2017Closed

Complaint · Partial · Health · 44 employees at the site · Closed Jun 8, 2017

812 Delano Street, Houston, TX 77003 · Charter Bus Industry · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$8,149$4,889May 18, 2017Final
Citation 1, item 2a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$6,519$3,911May 18, 2017Final
Citation 1, item 2b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0May 18, 2017Final
Citation 1, item 2c
29 CFR 1910.215(d)(3) · Grinders and abrasive wheels
Serious$0$0May 18, 2017Final
Citation 2, item 1 Other-than-serious$914$548May 18, 2017Final
Citation 2, item 2
29 CFR 1910.253(b)(4)(iii) · Gas welding and cutting
Other-than-serious$777$466May 18, 2017Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2018, the Houston site logged 1 recordable injury or illness among about 58 workers: 1.4 per 100 full-time workers, against a median of 3.9 for its industry. Those cases cost 19 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
CORP Houston El Expreso Bus Company
Houston · 2018
58 111.43.9
Harrisburg El Expreso Bus Company
Houston · 2018
8 000.03.9
Main El Expreso Bus Company
Houston · 2018
6 1117.83.9
Lockwood El Expreso Bus Company
Houston · 2018
5 000.03.9
Delano El Expreso Bus Company
Houston · 2017
68 212.13.9

Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.95 · Noise

Other charter bus industry employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.