OSHA SearchOSHA records by employer

Elite Booth LLC: OSHA inspections and violations

Raytown, Missouri · Sawmills · NAICS 321113

2inspections
7citation items
$21,881current penalties
Mar 5, 2026last inspection

Since 2026, OSHA inspectors have visited Elite Booth LLC in Missouri 2 times.

The most recent inspection opened on Mar 5, 2026 on a referral, in Raytown and is still open.

In all, OSHA issued 7 citation items: 7 serious.

The proposed penalties came to $64,547; today they stand at $21,881, 66% less.

The rule cited most here is 1910.213 (woodworking machinery), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Elite Booth LLC averages $10,940 across 2 cited inspections.

Elite Booth LLC also files yearly injury logs with OSHA, summarized below.

Elite Booth LLC: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Want to know if OSHA cites Elite Booth LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348787938 OPENED MAR 5, 2026Open

Referral · Complete · Health · 47 employees at the site · Open

9616 East 5th Street, Raytown, MO 64133 · Showcase, Partition, Shelving, and Locker Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(a)(1) · Walking-working surfaces
 Serious$11,585$1,500Aug 6, 2026Final
Citation 1, item 2 Serious$8,276$1,200Aug 6, 2026Final
Citation 1, item 3
29 CFR 1910.134(c)(1) · Respiratory protection
 Serious$6,620$1,100Aug 6, 2026Final
Citation 1, item 4
29 CFR 1910.1200(h)(1) · Hazard communication
 Serious$9,931$1,200Aug 6, 2026Final

Inspection 348777673 OPENED FEB 26, 2026Open

Referral · Partial · Safety · 45 employees at the site · Open

9616 East 55th Street, Raytown, MO 64133 · Sawmills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$11,585$6,951Jul 16, 2026Final
Citation 1, item 2
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$11,585$6,951Jul 16, 2026Final
Citation 1, item 3
29 CFR 1910.303(g)(1)(i) · Electrical equipment, general requirements
 Serious$4,965$2,979Jul 16, 2026Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Raytown site logged 4 recordable injuries or illnesses among about 53 workers: 7.9 per 100 full-time workers, against a median of 3.3 for its industry. Those cases cost 193 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Elite Booth LLC
Raytown · 2025
53 447.93.3

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.1200(h)(1)

(h) Employee information and training. (1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(c)(1)

(1) The test instrument must have an effective audio-warning device, or a visual-warning device in the form of a screen tracing, that indicates when the test subject fails to hold his or her breath during the test. The test must be terminated and restarted from the beginning when the test subject fails to hold his or her breath during the test. The test subject then may be refitted and retested.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.95 · Noise

Other sawmills employers in Missouri

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.