Elite Manufacturing Technologies Inc.: OSHA inspections and violations
Bloomingdale, Illinois · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
3inspections
5citation items
$14,455current penalties
Nov 20, 2017last inspection
OSHA has inspected Elite Manufacturing Technologies Inc. 3 times in Illinois since 2007.
The latest one began on Nov 20, 2017 on a referral, in Bloomingdale.
Those inspections ended with 5 citation items: 5 serious.
Penalties were first proposed at $28,058 and now stand at $14,455, 48% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 3 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Elite Manufacturing Technologies Inc. averages $6,500 (1 cited inspection).
Elite Manufacturing Technologies Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
426employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Elite Manufacturing Technologies Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Nov 13, 2017: Employee's fingertip is amputated when caught between unguar
At 6:45 a.m. on November 13, 2017, Employee #1, a press brake operator, was operating an Amada 50 ton hydraulic press brake, Number PB3, model number RG-5020LD, serial number 50200038, with a manufactured date of 1999. The employee was attempting to do two separate bends for each of 100 - 200 small brackets, 1.25 inches long by 0.35 inches wide. He hand fed each blank metal part into the unguarded point-of-operation between the upper and lower dies vertical opening of 0.5 inches, standing one to two feet away, forming them using a foot-treadle cycle actuation. The employee initiated each hazardous cycle by stepping on the horizontal bar-type foot pedal affixed to the machine's lower bed. During this production operation, Employee #1 inserted a work piece into the unguarded point-of-operation between upper and lower dies and while holding on to it, stepped on the foot pedal to actuate the cycle. The lower die started moving up against the stationary upper die and Employee #1's left index fingertip, which was holding onto the part about to be formed, was caught in between the dies, resulting in an amputation. Emergency response was called and the employee was transported to the hospital for his injury, where he was treated and released.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Bloomingdale site logged 3 recordable injuries or illnesses among about 185 workers: 1.9 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Elite Manufacturing Technologies, LLC
Bloomingdale · 2025
185
3
1
1.9
3.6
Bloomingdale (333)
Bloomingdale · 2023
187
5
1
1.3
3.6
Elite Manufacturing Technologies, Inc.
Bloomingdale · 2021
170
6
1
3.3
3.6
Elite Manufacturing Technologies
Bloomingdale · 2016
172
10
3
5.2
3.6
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Nov 13, 2017, Bloomingdale: Amputation · amputations · fingertip(s)
An employee was forming a small part on a press brake when his left index fingertip was caught and smashed between the punch and die, resulting in an amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(a) Use of protective equipment—(1) Personal protective equipment. (i) Employees working in areas where there are potential electrical hazards shall be provided with, and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed.
Other all other miscellaneous fabricated metal product manufacturing employers in Illinois
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.