Enlight Group II LLC: OSHA inspections and violations
Manitowoc, Wisconsin · Small Arms Ammunition Manufacturing · NAICS 332992
5inspections
8citation items
$46,870current penalties
Nov 19, 2024last inspection
Enlight Group II LLC has 5 OSHA inspections on record in Wisconsin, the first in 2022.
OSHA's last visit started on Nov 19, 2024 on a referral, in Manitowoc.
Across those inspections OSHA issued 8 citation items: 7 serious and 1 other-than-serious.
OSHA proposed $48,455 in penalties. After settlements and reviews the total is $46,870, down 3%.
Most often, OSHA cited 1910.119, process safety management (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Enlight Group II LLC averages $15,623 over 3 cited inspections in that time.
Enlight Group II LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Manitowoc site logged 21 recordable injuries or illnesses among about 310 workers: 8.6 per 100 full-time workers, against a median of 2.4 for its industry. Those cases cost 18 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Enlight Group II LLC
Manitowoc · 2024
310
21
4
8.6
2.4
Included with any plan: 3 more yearly logs from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Nov 11, 2024, Manitowoc: Amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
An employee was unjamming a part in an ammunition collator. When the part unjammed, the wheel in the collator continued to spin, contacting their right index finger and resulting in a fingertip amputation.
Dec 19, 2022, Manitowoc: Hospitalization · cuts, lacerations · abdomen, except internal location of diseases or disorders
On December 19, 2022, an employee was using a hammer and screwdriver to unjam a brass casing from the seating area of a pistol loader. The screwdriver struck the primer and caused the casing to explode. Shrapnel from the casing caused lacerations to the employee's abdomen.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(d) Process safety information. In accordance with the schedule set forth in paragraph (e)(1) of this section, the employer shall complete a compilation of written process safety information before conducting any process hazard analysis required by the standard. The compilation of written process safety information is to enable the employer and the employees involved in operating the process to identify and understand the hazards posed by those processes involving highly hazardous chemicals. This process safety information shall include information pertaining to the hazards of the highly hazardous chemicals used or produced by the process, information pertaining to the technology of the process, and information pertaining to the equipment in the process.
29 CFR 1910.119(e)(1)
(e) Process hazard analysis. (1) The employer shall perform an initial process hazard analysis (hazard evaluation) on processes covered by this standard. The process hazard analysis shall be appropriate to the complexity of the process and shall identify, evaluate, and control the hazards involved in the process. Employers shall determine and document the priority order for conducting process hazard analyses based on a rationale which includes such considerations as extent of the process hazards, number of potentially affected employees, age of the process, and operating history of the process. The process hazard analysis shall be conducted as soon as possible, but not later than the following schedule:
29 CFR 1910.119(f)(1)
(f) Operating procedures. (1) The employer shall develop and implement written operating procedures that provide clear instructions for safely conducting activities involved in each covered process consistent with the process safety information and shall address at least the following elements.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.