OSHA SearchOSHA records by employer

Faurecia Interior Systems, Inc: OSHA inspections and violations

Spring Hill, Tennessee · Motor Vehicle Seating and Interior Trim Manufacturing · NAICS 336360

2inspections
2citation items
$300current penalties
Oct 22, 2020last inspection

Since 2019, OSHA inspectors have visited Faurecia Interior Systems, Inc in Tennessee 2 times.

The most recent inspection opened on Oct 22, 2020 as a planned inspection, in Spring Hill.

In all, OSHA issued 2 citation items: 2 other-than-serious.

The penalties, $300 in total, stand where OSHA first set them.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Faurecia Interior Systems, Inc averages $300 across 1 cited inspection.

Faurecia Interior Systems, Inc also files yearly injury logs with OSHA, summarized below.

Faurecia Interior Systems, Inc: OSHA citation items per year, 2019 to 2020
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

342employers cited

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch Faurecia Interior Systems, Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Faurecia Interior Systems, Inc at 7 sites in 3 states. Together they've had 21 inspections and $49,293 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 7 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 344993456 OPENED OCT 22, 2020Closed

Planned · Complete · Safety · 180 employees at the site · Closed Mar 11, 2021

3555 Cleburne Ave, Spring Hill, TN 37174 · Motor Vehicle Seating and Interior Trim Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Other-than-serious$150$150Dec 9, 2020Final
Citation 1, item 2
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Other-than-serious$150$150Dec 9, 2020Final

Inspection 344007455 OPENED MAY 14, 2019Closed

Complaint · Partial · Safety · 150 employees at the site · Closed May 22, 2019

3555 Cleburne Ave, Spring Hill, TN 37174 · Motor Vehicle Seating and Interior Trim Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2021, the Spring Hill site logged 1 recordable injury or illness among about 118 workers: 0.8 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 1 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Faurecia Interior Systems
Spring Hill · 2021
118 110.82.7

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Other motor vehicle seating and interior trim manufacturing employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.