OSHA SearchOSHA records by employer

Fernando Romero: OSHA inspections and violations

Milton, Georgia · Siding Contractors · NAICS 238170

1inspections
5citation items
$5,600current penalties
Jan 13, 2016last inspection

OSHA inspectors have visited Fernando Romero in Georgia one time.

It opened on Jan 13, 2016 as a planned inspection, in Milton.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $11,200; today they stand at $5,600, 50% less.

The rule cited most here is 1926.451 (scaffolds, general requirements), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Fernando Romero averages $5,600 across 1 cited inspection.

Fernando Romero: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

146employers cited

6 of them in the same industry

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Fernando Romero and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341177764 OPENED JAN 13, 2016Closed

Planned · Partial · Safety · 2 employees at the site · Closed Oct 24, 2017

4055 Hopewell Springs Drive, Milton, GA 30004 · Siding Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
Serious$1,600$800Jan 28, 2016Final
Citation 1, item 2
29 CFR 1926.304(d) · Woodworking tools
Serious$2,800$1,400Jan 28, 2016Final
Citation 1, item 3
29 CFR 1926.451(b)(5)(ii) · Scaffolds, general requirements
Serious$2,000$1,000Jan 28, 2016Final
Citation 1, item 4
29 CFR 1926.451(g)(1)(i) · Scaffolds, general requirements
Serious$2,800$1,400Jan 28, 2016Final
Citation 1, item 5
29 CFR 1926.452(k)(1) · Rules for each type of scaffold
Serious$2,000$1,000Jan 28, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(5)(ii)

(ii) Each platform greater than 10 feet in length shall not extend over its support more than 18 inches (46 cm), unless it is designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end.

29 CFR 1926.452 · Rules for each type of scaffold

Other siding contractors employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.