Inspection 341376325 OPENED MAR 28, 2016Closed
6143 Ridge Road, Port Richey, FL 34668 · Sign Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Port Richey, Florida · Sign Manufacturing · NAICS 339950
OSHA has inspected First Crest Corporation 2 times in Florida since 2016.
The latest one began on Mar 28, 2016 on a referral, in Port Richey.
Those inspections ended with 6 citation items: 4 serious and 2 other-than-serious.
Penalties were first proposed at $3,600 and now stand at $2,160, 40% lower after settlements or reviews.
Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and First Crest Corporation averages $2,160 (1 cited inspection).
Florida · latest 90 days of OSHA records
326employers cited
Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Florida
Checking a subcontractor, a client or your own company? Watch First Crest Corporation and get notified the morning OSHA posts a new citation for it.
Watch this company6143 Ridge Road, Port Richey, FL 34668 · Sign Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
6143 Ridge Road, Port Richey, FL 34668 · Sign Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.22(a)(1) · General requirements |
Serious | $1,600 | $960 | Apr 14, 2016 | Final |
| Citation 1, item 1b 29 CFR 1910.36(g)(2) · Exit route design |
Serious | $0 | $0 | Apr 14, 2016 | Final |
| Citation 1, item 2a 29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts |
Serious | $2,000 | $1,200 | Apr 14, 2016 | Final |
| Citation 1, item 2b 29 CFR 1910.219(f)(1) · Belts, pulleys and power-transmission parts |
Serious | $0 | $0 | Apr 14, 2016 | Final |
| Citation 2, item 1 29 CFR 1910.37(b)(2) · Exit routes |
Other-than-serious | $0 | $0 | Apr 14, 2016 | Final |
| Citation 2, item 2 29 CFR 1910.303(a) · Electrical equipment, general requirements |
Other-than-serious | $0 | $0 | Apr 14, 2016 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(f)(1)
(f) Gears, sprockets, and chains—(1) Gears. Gears shall be guarded in accordance with one of the following methods:
29 CFR 1910.303(a)
(a) Approval. The conductors and equipment required or permitted by this subpart shall be acceptable only if approved, as defined in § 1910.399.
Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.