OSHA SearchOSHA records by employer

Flannel Fleet Logging, LLC.: OSHA inspections and violations

Medford, Wisconsin · Sawmills · NAICS 321113

1inspections
4citation items
$5,561current penalties
Feb 18, 2026last inspection

Flannel Fleet Logging, LLC. has one OSHA inspection on record in Wisconsin.

OSHA opened it on Feb 18, 2026 after a complaint, in Medford.

From that inspection OSHA issued 4 citation items: 4 serious.

OSHA proposed $7,944 in penalties. After settlements and reviews the total is $5,561, down 30%.

Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (3 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Flannel Fleet Logging, LLC. averages $5,561 over 1 cited inspection in that time.

Flannel Fleet Logging, LLC.: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

229employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch Flannel Fleet Logging, LLC. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348757253 OPENED FEB 18, 2026Closed

Complaint · Partial · Safety · 8 employees at the site · Closed Apr 17, 2026

N3235 Brook Drive, Medford, WI 54451 · Sawmills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$3,972$2,780Mar 19, 2026Final
Citation 1, item 2a
29 CFR 1910.219(b)(1) · Belts, pulleys and power-transmission parts
Serious$3,972$2,780Mar 19, 2026Final
Citation 1, item 2b
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$0$0Mar 19, 2026Final
Citation 1, item 2c
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Mar 19, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(b)(1)

(b) Prime-mover guards—(1) Flywheels. Flywheels located so that any part is seven (7) feet or less above floor or platform shall be guarded in accordance with the requirements of this subparagraph:

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other sawmills employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.