OSHA SearchOSHA records by employer

Fortune Plastics, Inc: OSHA inspections and violations

Lebanon, Tennessee · Footwear Manufacturing · NAICS 316210

1inspections
2citation items
$1,400current penalties
Nov 19, 2019last inspection

OSHA has inspected Fortune Plastics, Inc once in Tennessee.

The inspection began on Nov 19, 2019 on a referral, in Lebanon.

That inspection ended with 2 citation items: 2 serious.

Penalties were first proposed at $1,400 and still stand at $1,400.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Fortune Plastics, Inc averages $1,400 (1 cited inspection).

Fortune Plastics, Inc also files yearly injury logs with OSHA, summarized below.

Fortune Plastics, Inc: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

344employers cited

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch Fortune Plastics, Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344456231 OPENED NOV 19, 2019Closed

Referral · Partial · Safety · 96 employees at the site · Closed Jan 14, 2020

310 Hartman Drive, Lebanon, TN 37087 · Footwear Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Oct 30, 2019: Employee's finger is amputated in jammed plastic bag folder

At 5:45 a.m. on October 30, 2019, an employee was working as a machine operator for a firm that manufactured plastic bags and pouches. She was working on the facility's Line 18LD8. She was operating a Cooper Machine & Tool Co. model CF-12 bag folder, with serial number 05-175. The machine been installed fourteen years earlier. Using a conveyor and air, it folded trash bags in half twice. At the time of the incident, a trash bag had jammed between the conveyor and the bag folder. The employee was pulling it out through a 1.5-inch (38 mm) gap between the conveyor and a machine guard. The conveyor was 12 inches (300 mm) wide and 5 feet, 5 inches (1.65 meters) long. The guard that covered the folder was 7 inches (178 mm) long, 14 inches (356 mm) wide and 4.3 inches (109 mm) tall. The conveyor pulled her gloved hand through the gap. She suffered the amputation of her right ring finger at the first knuckle. It was not clear whether she was hospitalized. During interviews, employees stated that they operated the bag folder up to twelve hours per day. The bag folder would jam, depending on the thickness of the trash bag being folded. Bags were between 1 and 1.7 mils (0.025 to 0.043 mm) thick. The thinner bags and the thicker bags were usually the bags that jammed in the folder. The employees would try to pull jammed trash bags out of the machine while it was running. They did not unplug the machine while removing the jammed trash bag. If that did not work, they called their lead operator. The lead operator would then remove the machine by unplugging it and putting another folder in its place. Due to the inadequate guarding of the in-running nip point, employees were exposed to getting caught in the gap between the top and bottom rollers when clearing trash bag jams.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(d)(3) · Lockout/tagout
Serious$700$700Dec 13, 2019Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$700$700Dec 13, 2019Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2020, the Lebanon site logged 0 recordable injuries or illnesses among about 75 workers: 0.0 per 100 full-time workers, against a median of 2.6 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Fortune Plastics-Lebanon
Lebanon · 2020
75 000.02.6

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(d)(3)

(3) Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s).

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

Other footwear manufacturing employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.