Since 1982, OSHA inspectors have visited Freres Lumber Co Inc in Oregon 51 times.
The most recent inspection opened on Jul 15, 2024 as a planned inspection, in Mill City.
In all, OSHA issued 128 citation items: 61 serious, 1 repeat and 66 other-than-serious.
The proposed penalties came to $69,629; today they stand at $53,465, 23% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 13 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Freres Lumber Co Inc averages $12,257 across 3 cited inspections.
2 inspections on this page followed a fatal incident.
Freres Lumber Co Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
Incident on Jun 9, 2023 (fatal): Employee is killed when lumber cart overturns
At 2:00 p.m. on June 9, 2023, an employee was moving a rolling lumber cart loaded with plywood pieces. The employee was found to have the rollaway cart overturned with the cart and lumber on top of him. CPR was started and 911 called. The employee was taken by ambulance to the Santiam Hospital, where he was pronounced dead.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR OAR 437-002-0221(13)(A)-1
Serious
$6,500
$6,500
Nov 27, 2023
Final
Inspection 344188321 OPENED JUL 23, 2019Closed
Accident · Partial · Safety · 270 employees at the site · Closed Jul 24, 2023
Incident on Jul 19, 2019: Employee amputates thumb after being caught in veneer
At approximately 1:50 a.m. on July 19, 2019, an employee tried to remove a piece of veneer that was stuck in the #1 diverter on the outfeed side of the rotating clipper without utilizing lockout procedures. The employee sustained an amputation of his left thumb. The employee was hospitalized for these injuries.
No citations from this inspection.
Inspection 343803250 OPENED DEC 19, 2018Closed
Unprogrammed related · Partial · Safety · 197 employees at the site · Closed Jul 22, 2019
Incident on Dec 14, 2018: Employee amputates finger while cutting metal flat bar with
At 11:45 a.m. on December 14, 2018, an employee was cutting a piece of metal flat bar with a horizontal band saw and amputated a finger when it struck against the saw blade. The employee was hospitalized.
Incident on Feb 17, 2018: Employee catches hand in chain and sprocket and amputates fo
At 9:23 p.m. on February 17, 2018, an employee was working at Dryer #3 when it became jammed with some veneer. The employee climbing up the railing to clear the jam and caught his hand in the chain and sprocket. The employee amputated four fingers and was hospitalized.
No citations from this inspection so far.
Inspection 317629756 OPENED SEP 18, 2014Closed
Accident · Partial · Safety · 175 employees at the site · Closed Jul 30, 2015
Incident on Jan 18, 2013: Employee gets caught between equipment and structure
On January 18, 2013, Employee #1 was seriously injured. Employee #1, #2 and #3 w ere working out of an all terrain scissor lift installing wood forms on the wall s and the ceilings of concrete vats used in the process of veneer manufacturing. The job that they were doing was installing shotcrete on the walls and the ceil ing of the vat. As the scissor lift was going up from the ground to the ceiling, Employee #1 was holding a 2 in. by 2 in. by 8 ft form over the side of the rail of the lift as they were going up. When they got close to the ceiling, Employee #2, the lift operator, let go of the controls which should have stopped any mov ement of the lift. It did not, and the lift continued to raise toward the ceilin g. Employee #1 heard Employee #2 saying "it would not stop" so he started to sli de back into the working area of the lift but got his head caught between the ra il and the ceiling. Employee #2 hit the emergency stop but Employee #1 had alrea dy gotten caught. Employee #2 restarted the lift which reset and lowered enough to release Employee #1. Employee #2 and Employee #3 in the lift helped Employee #1to the floor of the lift and tried to make him comfortable and lowered the lif t to the ground. Employee #2 stayed with Employee #1 while Employee #3 went for help. 911 was called and Employee #1was transported to the nearest hospital. Emp loyee #1 stained a broken jaw along with a cracked vertebra in his neck.
No citations from this inspection.
Inspection 314787706 OPENED MAY 11, 2011Closed
Complaint · Partial · Health · 195 employees at the site · Closed Nov 18, 2011
Incident on Apr 12, 2007 (fatal): Employee is struck and killed by log truck
At approximately 8:45 a.m. on April 12, 2007, Employee #1 was flagging log truck s when he was struck by an empty log truck while it was backing up. Employee #1 sustained fractures and was killed.
No citations from this inspection.
Inspection 309829646 OPENED MAY 12, 2006Closed
Planned · Partial · Safety · 430 employees at the site · Closed Dec 6, 2006
Incident on Dec 9, 2005: Employee's fingers are amputated in chipper
At approximately 11:20 p.m. on December 9, 2005, Employee #1 was attempting to r emove wood debris from the in-feeder of a chipper, at Freres Lumber. He had rais ed the guard over the in-feeder to allow access to the debris that was causing a blockage. He was injured when the glove on his right hand got caught and his ha nd was pulled into the in-feed. He was hospitalized for the amputation of his li ttle finger and a portion of the ring finger on his right hand.
Incident on Jun 4, 2003: Employee amputates finger and thumb in chain drive
On June 4, 2003, an employee of Freres Lumber Co. Inc. was assisting other cowor kers in clearing a plug up on the outfeed and unloader of a Plywood Dryer. While attempting to pull a piece of wood from the chain and sprocket drive, the emplo yee's index finger and thump tip were pulled into the drive and wedged between t he frame of the unloader and the chain drive idler sprocket. The employee's fing er and thumb became trapped. The idler sprocket was loosened up and the drive wa s turned backwards to release the finger and thumb. The emergency first aid was administered. The employee was transported by ambulance to the hospital and was hospitalized for amputation.
Employee #1 was sliding a belt back on the tipple of a veneer lathe. The tipple closed unexpectedly on his foot, crushing it. Employee #1 was hospitalized for h is injury.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Lyons site logged 21 recordable injuries or illnesses among about 260 workers: 7.0 per 100 full-time workers, against a median of 3.9 for its industry. Those cases cost 13 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Lyons site
Lyons · 2021
260
21
5
7.0
3.9
Plywood Division
Mill City · 2017
194
29
16
14.7
3.9
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(d) Exposure monitoring—(1) General. (i) Each employer who has a workplace covered by this standard shall monitor employees to determine their exposure to formaldehyde.
(f) Any organic peroxide which, in laboratory testing, neither detonates in the cavitated state nor deflagrates at all and shows only a low or no effect when heated under confinement as well as low or no explosive power shall be defined as organic peroxide TYPE F;
29 CFR 1910.1200(h)(3)(ii)
(ii) The physical, health, simple asphyxiation, combustible dust, and pyrophoric gas hazards, as well as hazards not otherwise classified, of the chemicals in the work area;
29 CFR 1910.132 · Personal protective equipment, general requirements
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.